can anyone help me with this question please! asap

Answer:

Neon Z=10

Explanation:

Neon has eight valence electrons, this closed she'll configuration makes neon supremely difficult to oxidized and difficult to reduce

The required ratio of rms velocities of the molecules of two gases A and B is 1:4.

Root mean square (R.M.S.) speed of a gas is a square base of the normal of the square of speed. In that capacity, it has units of speed. R.M.S. = M3RT. where R = gas consistent, T = temperature (in K), M = molar mass of the gas.

According to question:

We have,

M1 = 16, M2 = 2, T1 = 200k, T2 = 400K

Vrms = root(3RT/M)

Here,

Va/Vb =[tex]\sqrt\frac{200*2}{16*400} }[/tex]

Va/Vb= 1:4

R is constant

Thus, Required ratio is 1:4

To know more about Root mean square velocity visit:

brainly.com/question/1954525

#SPJ4

Q. What is the ratio of rms velocities of the molecules of two gases A and B whose molecular weights are 400 and 200 gm/mol respectively?

The mass of lithium required to react with 4.96 g of bromine is 0.372 g. The number of moles of each reactant is 0.062. Therefore the percentage composition of each element in the product is 50%.

The percentage composition of a compound is the weight percentage of each element present in the compound contributing to the total weight of the compound.

The reaction between lithium and bromine gas is given below:

[tex]\rm Br_{2} + 2 Li \rightarrow 2LiBr[/tex]

As per this reaction one mole bromine gas reacts with 2 moles of Li.

mass of Br₂ = 160 g/mol

mass of Li = 6 g/mol

for 2 Li = 12 g/mol

160 g of Br reacts with 12 g of Li. Thus, mass of Li required by 4.96 g of bromine gas is:

4.96 × 12 / 160 = 0.372 g.

The number of moles of Br = 4.96/ 80 = 0.062

no. of moles of Li = 0.372 / 6 = 0.062

The number of moles of each element is equal and hence, the percentage composition is 50 % each of Li and Br.

To find more on LiBr, refer here:

https://brainly.com/question/7256732

#SPJ1

Bromine makes up 92.1% of the compound, while the remaining 7.9% is made up of lithium.

Percent composition is a way of expressing the proportion of each element in a compound as a percentage of the total weight of the compound.

To find the percent composition of an element in a compound, divide the weight of the element in the compound by the total weight of the compound, and then multiply by 100%.

In this case, the weight of bromine in the compound is 4.96 g, and the total weight of the compound is 5.39 g. Therefore, the percent composition of bromine in the compound is:

[tex](4.96 g / 5.39 g) * 100% = 92.1%[/tex]

This means that bromine makes up 92.1% of the compound, while the remaining 7.9% is made up of lithium.

Learn more about percent composition, here:

https://brainly.com/question/17505281

#SPJ1

According to Boyle's law which is a law for constant temperature the  the total equilibrium pressure of the system if the volume of the reaction vessel is reduced to 1.0 l  is 2.4 atmospheres.

Boyle's law is an experimental gas law which describes how the pressure of the gas decreases as the volume increases. It's statement can be stated as, the absolute pressure which is exerted by a given mass of an ideal gas is inversely proportional to its volume provided temperature and amount of gas remains unchanged.

Mathematically, it can be stated as,

P∝1/V or PV=K. The equation states that the product of of pressure and volume is constant for a given mass of gas and the equation holds true as long as temperature is maintained constant.

According to the equation the unknown pressure and volume of any one gas can be determined if two gases are to be considered.That is,

P₁V₁=P₂V₂

Substitution in above equation gives P₂=1.2×2/1=2.4 atmospheres.

Hence, the total equilibrium pressure of the system if the volume of the reaction vessel is reduced to 1.0 l  is 2.4 atmospheres.

Learn more about Boyle's law,here:

https://brainly.com/question/1437490

#SPJ1

Answer:

True

Explanation:

Sources include renewable energy sources such as the sun, wind, water, and geothermal heat. However, we also use artificial sources generated by humans, such as walking, vehicle motion, and system vibration.

Hope it helps

The aldol condensation is a chemical reaction that occurs between a carbonyl compound and an alpha, beta-unsaturated carbonyl compound to form a new carbon-carbon bond, resulting in the formation of a new molecule. This reaction is an example of a crossed aldol reaction because the two starting compounds are not structurally similar.

In the case of cyclopentanone reacting with trans-cinnamaldehyde, the reaction occurs in the following steps:

Learn more about Aldol Condensation here: brainly.com/question/27178362
#SPJ4

As a hardening agent, pewter is a tin-based alloy with varying quantities of antimony, bismuth, copper, and lead.  

As a hardening agent, pewter is a tin-based alloy with varying quantities of antimony, bismuth, copper, and lead.

Pewter drinkware maintains liquids at their ideal temperatures for a longer period of time, whether they are hot or cold. A Lovely And Enjoyable Lifetime.

Pewter drinkware maintains liquids at their ideal temperatures for a longer period of time, whether they are hot or cold.

Become familiar with pewter.

Visit

https://brainly.com/question/29627686

#SPJ4

The shielding effects help to explain why it is easier to take electrons from smaller atoms. Due to the fact that as the shielding effect increases, the ionization energy decreases.

what is shielding effects?

The shielding effect looks at how electrons closer to the nucleus tries to shield the electrons farther away from the positive charge of the nucleus which is the reduction in the effective nuclear charge on the electron cloud, as a result of difference in the attractive force.

what is electron shielding?

In a simple term Electron shielding is described as the blocking of valence shell electron attraction by the nucleus, which is as a result of the presence of inner-shell electrons.

learn more about shielding effect here:

brainly.com/question/25950742

#SPJ1

Answer: An ionic bond will be most likely formed between francium and chlorine having an electronegativity difference of 2.46.

Explanation:

The relationship between the given structures is that they are enantiomers. Therefore, option A is correct.

In chemistry, an enantiomer also called an optical isomer is one of two stereoisomers that are non-superposable onto their own mirror image. Enantiomers are much like when looking at the same face one's right and left hands, they cannot be superposed with each other.

The asymmetric atom is a type of stereocenter that refers exclusively to a chirality center. Compounds that consist of one of the asymmetric atoms are always chiral.

No amount of reorientation will allow the 4 unique groups on the chiral carbon. The number of stereoisomers has can be determined by the number of chiral carbons in it. Stereoisomers have types both enantiomers and diastereomers.

Diastereomers share the same molecular formula as enantiomers and are non-superposable however, they do not mirror images of each other.

A chiral molecule rotates plane-polarized light. A mixture of equal amounts of each enantiomer, a racemic mixture does not rotate the light.

Learn more about enantiomers, here:

https://brainly.com/question/21506956

#SPJ4

According to the Nerst equation, when Ecell = 0 then : A) Q = K, the nerst equation is then :

log Keq = (n E°) / (0.0592 V)

The Nerst equation is given as follows :

E cell = E°cell  - (0.0592 V / n ) log Q

the electrical potential of the cell is depend on the Q, that reaction quotient of the reaction. at equilibrium ΔG = 0 . the reaction quotient    Q = K and from the equation , ΔG = -nFE , ans E = 0, now the nerst equation is given as :

0 = E° - ( RT / nF ) ln K

0 = E° - ( 0.0592 V / n) log K

log K = (n E°) / (0.0592 V)

To learn more Ecell here

https://brainly.com/question/3807566

#SPJ4

MgO contains three atoms in total, of which one is Mg and one was O.

Therefore, MgO contains only 1 atom of magnesium.

A chemical element was uniquely defined by its atoms, which are tiny pieces of substance. An atom is made up of a core nucleus and one or even more electrons with negative charges that orbit it. The positively charged, comparatively hefty protons as well as neutrons that make up the nucleus may be present.

The positively charged nucleus is located in the middle of an atom. It must be composed of two types of closely grouped subatomic particles.

Protons, which possess a positive electric charge, as well as neutrons, that have no electric charge, are just particles.

Learn more about atoms here : -

https://brainly.com/question/13654549

#SPJ4

Answer:

Action potentials are self-regenerating

There are total 3 atoms in MgO, in which 1 atom is of Magnesium and 1 atom is of Oxygen.

Atom

An atom is a particle of matter that uniquely defines a chemical element. An atom consists of a central nucleus that is surrounded by one or more negatively charged electrons. The nucleus is positively charged and contains one or more relatively heavy particles known as protons and neutrons.

Nucleus

The nucleus  is a positively charged region at the center of the atom. It consists of two types of subatomic particles packed tightly together.

The particles are protons, which have a positive electric charge, and neutrons, which are neutral in electric charge.

Learn more about atoms here :-

https://brainly.com/question/1566330

#SPJ4

The explanation we utilize the rms velocity rather than the normal is that for a commonplace gas test the typical speed is zero since the particles are moving every which way.

Root mean square (RMS) velocity is the square base of the amount of the squares of the stack speed values partitioned by the quantity of values. RMS speed is the speed of a wave going through underground developments at various span speeds along a given beam way.

For flat or marginally inclined layers, NMO and stacking speed are equivalent to RMS speed. In any case, in regions with huge parallel speed varieties, the stack velocity contrasts essentially from the RMS speed.

Conduction is the minuscule temperature inclination of the root-mean-square speed of issue. This substance can be either strong, fluid, or gas.

The explanation we utilize the rms velocity rather than the normal is that for a regular gas test the typical speed is zero since the particles are moving every which way.

To know more about  rms velocity, visit:

brainly.com/question/29605566

#SPJ4

The elements tend to form positive ions which tend to form negative ions is known as a metal.

Metals as we know are the most common elements that produce positive ions. This is because of a metals' low electronegativity. Positive ions can be formed by nonmetals as well, but this is no very common they generally form negative ions known as anions.

Metals are reactive in nature and tends to gain stability be reacting with other elements and losing electrons to form cations.

The reactivity series of metals is a series using which we can see which metal has the highest and which metal has the lowest reactivity.

The given question is incomplete I have answered it as per my general knowledge.

To learn more about metals

brainly.com/question/29404080

#SPJ4

The chief difference between two identical clay tiles, if one is hot and one is cold, is in the amount of heat energy each contains.

Heat energy is a form of energy that is transferred from one object to another, and in this case, the hot tile contains more heat energy than the cold tile. Heat energy is transferred from one object to another through a process called conduction.

When one object is hotter than another, heat energy is transferred from the hotter object to the cooler object until both objects reach the same temperature. In the case of the two clay tiles, the hotter tile will transfer its heat energy to the cooler tile until the tiles reach the same temperature.

The amount of heat energy each tile has can also be measured. Heat energy is measured in joules, and the hotter tile will have a higher number of joules than the cooler tile. To measure the amount of heat energy each tile contains, a thermometer can be used, which will measure the temperature of each tile and then calculate the amount of heat energy each tile contains.

Learn more about conduction at : https://brainly.com/question/12136944

#SPJ4

The emission of carbon that are avoided are called scope 4 Carbon emission.

The scope for Carbon emissions are those emissions of carbon which are reduced or avoided.

They can also be defined as the reductions that have occurred outside of a products complete cycle or the value chain.

The product cycle are those which are related to the manufacturing cycle of the carbon related products.

Collectively all the greenhouse emissions that are avoided or which are reduced to a very significant level are known as scope 4 emissions.

To know more about carbon emission, visit,

https://brainly.com/question/1301348

#SPJ4

The greater concentration of H+ in the intermembrane space of the mitochondria more will be the more ATP production by ATP synthetase.

The high external  H+ ions concentration influences concentration within intermembrane space, which increases the amount of ATP produced by ATP synthase. The functioning of ATP synthase solely depend on the gradient of H+ ion concenteration. This gradient must have a high concentration in the intermembrane space and a low concentration in the matrix. H+ cannot flow through the outer membrane of the mitochondria but can do so through the inner membrane. By putting mitochondria in a low pH buffer, an H+ gradient is created, which ATP synthase can use to synthesize ATP.

Hence, movement of H + across ATP synthase generates ATP.

To know more about Buffer.

https://brainly.com/question/22821585

#SPJ4

An elimination reaction can have two products major and minor which are shown in the attached diagram below.

An elimination reaction can be described as a type of organic reaction in which two substituents are eliminated from a molecule in either a one- or two-step mechanism.

The one-step mechanism is called the E₂ reaction, and the two-step mechanism is called the E₁ reaction. The kinetics of the reaction: E₂ is bimolecular or second-order while E₁ is a unimolecular or first-order reaction.

In cases where the molecule is capable to stabilize an anion but has a poor leaving group, a third type of reaction, E₁-CB.

The E₂ mechanism involves a one-step mechanism in which carbon-hydrogen and carbon-halogen bonds break to prepare a double bond.

E₁ stands for unimolecular elimination where the carbon-halogen bond breaks to give a carbocation intermediate and then deprotonation of the carbocation.

Learn more about elimination reactions, here:

https://brainly.com/question/29695970

#SPJ4

To find the mass of a MgCO3 molecule in kilograms, you can first determine the molar mass of MgCO3 in grams/mol, and then divide that value by the conversion factor between grams and kilograms.

The molar mass of a substance is the mass of one mole of that substance, and it is typically expressed in grams/mol. The molar mass of MgCO3 is 84.311 g/mol. This can be calculated by adding up the atomic weights of the individual elements in the molecule:

Mg: 24.305 g/mol

C: 12.01 g/mol

O: 16.00 g/mol

Total: 52.315 g/mol

To find the mass of one MgCO3 molecule in kilograms, you can divide the molar mass of MgCO3 (84.311 g/mol) by the conversion factor between grams and kilograms, which is 1000 g/kg. This gives you a mass of 0.08431 kg/mol for MgCO3.

To find the mass of a single MgCO3 molecule in kilograms, you would need to divide this value by Avogadro's number, which is the number of atoms or molecules in one mole of a substance. Avogadro's number is 6.022 x 10^23 atoms/mol or molecules/mol.

So the mass of a single MgCO3 molecule in kilograms would be:

(0.08431 kg/mol) / (6.022 x 10^23 molecules/mol) = 1.40 x 10^(-25) kg

I hope this helps! Let me know if you have any questions.

Ionic bonds do not follow the rule that an ion has the same number of electrons as a nonionic atom of the same element.

Chemical bonds known as ionic bonds produce two ions with opposing charges. The entire transfer of valence electrons between atoms is referred to be this bonding. A molecule or compound is created when two atoms combine through a chemical link. Furthermore, they are connected by this relationship. The fact that this link can be ionic or covalent is most notable. Ionic bonds also involve the donation of an electron from one atom to another for stability. In covalent connections, however, the electrons and the atoms are shared. Between a metal and a non-metal, an ionic connection develops in which the non-metal draws the electron from the other atom.

To know more about  ionic bonds please click on the link brainly.com/question/11527546

#SPJ4

Answer:d

Explanation:

d

The hydrologic cycle, another name for the water cycle, describes where and how water is kept on Earth.

In the atmosphere, on the surface of the land, and underground, water is kept in reserve. It could be a gas, a liquid, or a solid. Either fresh or salt water can be a liquid (salty).

Water flows between its storage locations. It flows on both extremely tiny scales and very big scales (via watersheds, the atmosphere, and below the Earth's surface) (in people, in plants, and in other organisms).

Water flows both naturally and as a result of human activity. The motion of water on Earth is sustained by the force of gravity and solar energy. The water cycle is impacted by human activity because it changes where water is.

For more information on water cycle kindly visit to

https://brainly.com/question/1151425

#SPJ1

There are several types of software available for assessing the carbon footprint of a company, organization, or individual. These tools can help users track their GHG emissions and set reduction targets.

Learn more about carbon footprint here:

https://brainly.com/question/282900

#SPJ4

The mass of  each substances are Calcium nitrate = 0.08146 mole, Ammonium fluoride = 0.37 mole , Calcium fluoride = 6.3538  g, Dinitrogen monoxide=7.16848 g and Water=  5.86512 g

Ca(NO3)2 + 2 NH4F → CaF2 + 2 N2O + 4 H2O.
1. convert the given reactant mass into moles.
Calcium nitrate : 13.36/164=0.08146 mole
Ammonium Fluoride : 13.92/37 = 0.37 mole


One mole of Ca(NO3)2 completely reacts with 2 moles of
Ammonium Fluoride = 2 x 0.08146 =0.16292.
mole of NH4F reacts completely with calcium nitrate .
Ammonium Fluoride left = 0.37 - 0.16292 = 0.20708 mole
= 0.20708x 37 = 7.66 g is left.


Calcium nitrate is the limiting reagent:
Amount of CaF2 formed =  0.08146 mole * 78 = 6.3538  g.
(since one mole of Calcium nitrate gives one mole of CaF2).    
Amount of dinitrogen monoxide formed = 0.08146x2x44= 7.16848 g
Amount of water formed =0.08146x4x18= 5.86512 g.


To learn more about calcium
https://brainly.com/question/29597119
#SPJ4

When some of the vapor is allowed to escape, the pressure of the vapor will decrease, resulting in a decrease in the rate of condensation.

This is because the vapor pressure is directly proportional to the rate of condensation. Since the pressure of the vapor is lower, it is less likely for the molecules to collide and condense.

Furthermore, the rate of vaporization will increase since the pressure inside the container is lower. This is because when the pressure is lower, the molecules require less energy to escape the liquid, thus increasing the rate of vaporization.

For more questions like Condensation click the link below:

https://brainly.com/question/15563071

#SPJ4

The condensation rate will initially be higher than the vaporization rate.

When a liquid is in equilibrium with its vapor and some of the vapor is allowed to escape, the condensation rate will initially be higher than the vaporization rate. This is because the vapor pressure in the system has decreased due to the escape of some vapor.

To re-establish equilibrium, the liquid will increase its vaporization rate to produce more vapor. As the vaporization rate increases, it will eventually match the condensation rate again, and the system will return to equilibrium. So, initially, there is an effect on the condensation and vaporization rates, but the system will adjust to restore the equilibrium between the two rates.

Learn more about condensation: brainly.com/question/30629848

#SPJ11

Option B. Acetic acid has the formula C2H4O2. In order to distinguish it from its isomers, it is frequently written with CH3CO2.

Then, is CH3COOH a base or an acid. Because the ions in CH 3 COOH do not fully ionise to release H + ions when they are dissolved in water, it is a weak acid. As a result, there are less hydrogen ions in the acetic acid's final solution, which ultimately results in a weak acid.

Since CH3COOH does not release any OH- ions when dissolved in water, it is not an Arrhenius base. According to the Bronsted-Lowry theory for bases, a base is defined as a chemical that absorbs the proton from other molecules and uses it to form a conjugate acid.

To learn more about Acetic acid please click on below link

https://brainly.com/question/15202177

#SPJ4

Lewis structures of F2CNH is F2 - C - N - H.

The octet rule is a theory that describes how atoms share electrons so that each atom has eight electrons in its outer shell. This idea. is the foundation. of a Lewis. structure. An oxygen. atom, has six electrons. in its outer. shell. The arrangement of the atoms or molecules is given structure by the Lewis Dot Structure, which is represented by a pattern of dots, lines, and atomic symbols. A single atom, a covalent molecule, or a polyatomic ion can all be given a Lewis Dot Structure. The bonding between a molecule's atoms and its lone pairs of electrons is depicted in Lewis structures, also called Lewis-dot diagrams. Lewis structures can be combined with hybrid models to predict molecular geometry.

Learn more about Lewis structures here:

https://brainly.com/question/20300458

#SPJ4

They gave him the name Cupid, which is another name for Eros and also means "desire."For the Romans, Cupid was usually a cute little lad who carried out his mother's instructions to make individuals fall in love.

Eros (Roman Cupid), the deity of love, and his wife PSYKHE (Psyche), the goddess of a soul.She was originally a mortal princess, and when mankind started to worship her instead of the goddess Aphrodite (Roman Venus), the goddess became enraged.

According to Apuleius, Voluptas and Volupta is indeed the daughter of Cupid and Psyche in Roman mythology.The Latin term voluptas, which is also known as that of the goddess for "sensual pleasures," signifies "pleasure" or "delight."She frequently hangs out with the Gratiae, also known as the Three Graces.

To know more about Cupid visit:

https://brainly.com/question/13516179

#SPJ4