During the formation of water from hydrogen atoms and one oxygen

Answer:

When all molecules in a system stop moving completely, there is zero thermal energy

Explanation:

It is impossible to reach though

Answer:

Explanation:

Answer:

1. pH = 1.23.

2. [tex]H_2C_2O_4(aq) +OH^-(aq)\rightarrow HC_2O_4^-(aq)+H_2O(l)[/tex]

Explanation:

Hello!

1. In this case, for the ionization of H2C2O4, we can write:

[tex]H_2C_2O_4\rightleftharpoons HC_2O_4^-+H^+[/tex]

It means, that if it is forming a buffer solution with its conjugate base in the form of KHC2O4, we can compute the pH based on the Henderson-Hasselbach equation:

[tex]pH=pKa+log(\frac{[base]}{[acid]} )[/tex]

Whereas the pKa is:

[tex]pKa=-log(Ka)=-log(5.90x10^{-2})=1.23[/tex]

The concentration of the base is 0.347 M and the concentration of the acid is 0.347 M as well, as seen on the statement; thus, the pH is:

[tex]pH=1.23+log(\frac{0.347M}{0.347M} )\\\\pH=1.23+0\\\\pH=1.23[/tex]

2. Now, since the addition of KOH directly consumes 0.070 moles of acid, we can compute the remaining moles as follows:

[tex]n_{acid}=0.347mol/L*1.00L=0.347mol\\\\n_{acid}^{remaining}=0.347mol-0.070mol=0.277mol[/tex]

It means that the acid remains in excess yet more base is yielded due to the effect of the OH ions provided by the KOH; therefore, the undergone chemical reaction is:

[tex]H_2C_2O_4(aq) +OH^-(aq)\rightarrow HC_2O_4^-(aq)+H_2O(l)[/tex]

Which is also shown in net ionic notation.

Best regards!

mass = 20.48 g

moles=0.1895

In general, the gas equation can be written  

where  

P = pressure, atm  

V = volume, liter  

n = number of moles  

R = gas constant = 0.08205 L.atm / mol K  

T = temperature, Kelvin  

P=0.23 atm

V=20 L

T=23+273=296 K

[tex]\tt n=\dfrac{PV}{RT}=\dfrac{0.23\times 20}{0.082\times 296}=0.1895[/tex]

mass SF₄ (MW=108,07 g/mol) :

[tex]\tt 0.1895\times 108,07 g/mol=20.48~g[/tex]

Answer:

0.548 moles of HBr are required

Explanation:

Given data:

Number of moles of  hydrobromic acid = ?

Moles of bromine formed = 0.274 mol

Solution:

Chemical equation:

2HBr     →   H₂  + Br₂

Now we will compare the moles of HBr with Br₂.

               Br₂           :           HBr

               1               :            2

               0.274       :           2×0.274=0.548

Thus, 0.548 moles of HBr are required.

Answer:

1.  car traveled 30 meters per second

2. pepper traveled 10 meters per second

3. tony drove around 500 meters per minute

4. the bird traveled 200 miles

Hope this helped!

Answer:

use google

Explanation:

Answer:

The required milliliters of CsNO3 in solution 1 = 42.29 mL

Explanation:

Given that:

The molarity of CsNO3 in solution 1 M₁= 0.266 M

The Volume of CsNO3 in solution 1 V₁  =   ???

The Volume of CsNO3 in solution 2 V₂ = 150.0 mL

The molarity of CsNO3 in solution 2 M₂= 0.075 M

By the application of the titrimetric concept:

M₁V₁ = M₂V₂

We have;

0.266 M ×  V₁  = 0.075 M × 150.0 mL

V₁  = ( 0.075 M × 150.0 mL ) / 0.266 M

V₁  = (11.25 / 0.266 ) mL

V₁  = 42.29 mL

Answer:

An example is the formation of ATP, which is an endergonic process and is coupled to the dissipation of a proton gradient.

Explanation:

Hope this helped!

Answer:

1.Reaction rate is how fast a chemical reaction proceeds.

2.Nature of the reaction, Pressure factor

, Solvent, Catalyst and inhibitors.

3.Physical change is a temporary change. A chemical change is a permanent change. A Physical change affects only physical properties i.e. shape, size, etc.

4. One example of the effect of temperature is the use of lightsticks or glowsticks.

5.When the particle size of a fixed mass of a solid reactant becomes smaller, the total exposed surface area becomes larger, the rate of reaction increases. an example could be ice and water when the atoms are stuck together a solid but all over the place as a liquid.

6. Sometimes a reaction depends on catalysts to do their job. In that case, changing the concentration of the catalyst can speed up or slow down the reaction. For example, enzymes speed up biological reactions, and their concentration affects the rate of reaction.

7.A catalyst is a chemical substance that affects the rate of a chemical reaction by altering the activation energy required for the reaction to proceed. For example, a catalyst could cause a reaction between reactants to happen at a faster rate or at a lower temperature than would be possible without the catalyst.

Explanation:

I hope this helps have a great day! :)

Answer:

[tex]K=0.14[/tex]

Explanation:

Hello!

In this case, for the undergoing chemical reaction, we can write the equilibrium expression via:

[tex]K=\frac{[SO_2][NO_2]}{[SO_3][NO]}[/tex]

Whereas the equilibrium concentration of both SO3 and NO are 2.55 M and 1.90 M respectively, it means that the extent of reaction [tex]x[/tex] is:

[tex]x=1.90M-1.20M=0.7M[/tex]

Because the equilibrium expression in terms of the reaction extent is:

[tex]K=\frac{x*x}{([SO_3]_0-x)([NO]_0-x)}[/tex]

It means that the concentration of SO3, NO, SO2 and NO2 at equilibrium are:

[tex][SO_3]=2.55M-0.70M=1.85M[/tex]

[tex][NO]=1.20M[/tex]

[tex][SO_2]=0.70M[/tex]

[tex][NO_2]=0.70M[/tex]

Thus, the equilibrium constant for such reaction is:

[tex]K=\frac{0.70*0.70}{1.85*1.90}\\\\K=0.14[/tex]

Best regards!

Answer:

work out if it's either going to sink or float

Explanation:

this can be carried out by calculating the numbers

Answer:

C. The weaker the acid, the higher the pH at the equivalence point.

Explanation:

In a titration, a solution which concentration is known is added gradually to another solution of unknown concentration, until the chemical reaction between the two solutions is complete.

The pH in the equivalence point is equal to 7.00 only if both the acid and base are strong. When one or both reactants are weak, the pH in the equivalence point is not equal to 7.00.

In the equivalence point, the amount of strong base (like NaOH) added is just enough to react stoichiometrically with the weak acid. The resulting solution "only" contains the conjugated base A⁻. A solution of Na⁺A⁻ is the solution of a weak base:

A⁻ + H₂O ⇄ HA + OH⁻              Kb=Kw/Ka

In the equivalence point of the titration of a weak base with a strong base, the pH is higher than 7.00 because at this point the acid is transformed into its conjugate base.

Answer:

1.5 moles of Fe produced.

Explanation:

Given data:

Moles of FeO react = 1.50 mol

Moles of iron produced = ?

Solution:

Chemical equation:

FeO + CO       →       Fe + CO₂

Now we will compare the moles of ironoxide with iron.

                           FeO          :           Fe

                              1             :             1

                             1.5           :           1.5

Thus from 1.5 moles of FeO 1.5 moles of Fe are produced.                                    

1.5 moles of Fe can be obtained when 1.50 mol of FeO reacts with an excess

of CO

Moles of FeO reacted  = 1.50 mol

Moles of iron produced = ? mol

The chemical equation is given as

FeO + CO       →       Fe + CO₂

Comparisons of FeO and Fe show they are in the ratio 1 : 1

                          FeO          :           Fe

                            1.5           :           1.5

which translates to the number of moles being equal

Therefore, 1.5 moles of FeO 1.5 moles of Fe are produced.    

Read more on   https://brainly.com/question/19123159

Answer:

Empirical formula is C₂H₆S

Explanation:

Given data:

Percentage of hydrogen = 9.73%

Percentage of carbon = 38.66%

Percentage of sulfur = 51.61%

Empirical formula = ?

Solution:

Number of gram atoms of H = 9.73 / 1.01 = 9.6

Number of gram atoms of S = 51.61 / 32 = 1.6

Number of gram atoms of C = 38.66 / 12 = 3.2

Atomic ratio:

             C                      :      H              :         S

           3.2/1.6               :     9.6/1.6       :       1.6/1.6

            2                      :        6             :        1

C : H : S = 2 : 6 : 1

Empirical formula is C₂H₆S.

Answer:

(a) 6332.812 N (b) 1469.59  pounds.

Explanation:

Given that,

The surface area of the top of yu head is 25 cm x 25 cm

Area = 625 cm² = 0.0625 m²

Atmospheric pressure on it is 101325 Pa.

(a) Pressure acting on an object is given by force acting per unit area. It can be written as :

[tex]P=\dfrac{F}{A}\\\\F=PA\\\\F=101325\ Pa\times 0.0625\ m^2\\\\F=6332.812\ N[/tex]

6332.812 N of force is acting on your head at sea level.

(b) If area, A = 100 in²

We know that,

1 atm = 14.6959 pounds/in²

[tex]P=\dfrac{F}{A}\\\\F=PA\\\\F=14.6959 \ \text{Pounds}/in^2\times 100\ in^2\\\\F=1469.59\ \text{pounds}[/tex]

So, the force is 1469.59  pounds.

A. The force required to push your head at sea level is 6332.8125 N

B. The force in pound is 1469.59 lb

A. Determination of the force required at sea level.

Pressure (P) = 101325 Nm²

Area (A) = 25 cm × 25 cm = 0.25 m × 0.25 m = 0.0625 m²

P = F / A

Cross multiply

F = PA

F = 101325 × 0.0625

Therefore, the force required to push your head at sea level is 6332.8125 N

B. Determination of the force in pounds

Area (A) = 100 in²

Pressure (P) = 14.6959 pound / in²

F = PA

F = 14.6959 × 100

Learn more: https://brainly.com/question/13182194

Answer:

1 oxygen and 2 hydrogen

Answer:

Concentration of the chemist's copper(II) sulfate solution is 0.43 mol/L

Note: The volume of the flask is assumed  to be 250 mL

Explanation:

Since the volume of the volumetric flask is not given, we assume the volume its volume to be 250 mL.

Mass of copper (ii) sulfate = 17.2 g; molar mass of copper (ii) sulfate = 160 g/mol

Concentration in mol/L = number of moles/volume in litres

Number of moles of copper (ii) sulfate = 17.2 g / 160 g/mol = 0.1075 moles

Volume of flask in litres = 250 mL/1000 mL * 1 L = 0.250 L

Concentration = 0.1075 moles / 0.250 L = 0.43 mol/L

Therefore, concentration of the chemist's copper(II) sulfate solution is 0.43 mol/L

Answer:

0.5000

Explanation:

We can measure the concentration of the copper sulfate solution as 1.000 mol/L. Since the tank contains one half liter, the solution contains 0.5000 moles of copper sulfate.

Answer:

the water cycle shows the continuous movement of water within the Earth and atmosphere. it is a complex system that includes many different processes. Beckley water evaporates into water vapor, condenses to form clouds, and precipitates back to Earth in the form of rain and snow. Water in different phases moved across the atmosphere. The Cove water flows across the land, into the ground, threw the ground. Groundwater moves into plants and evaporates from plants into the atmosphere. Solid ice and snow can turn directly into gas. It can also take place when water vapor becomes solid

Explanation:

hope this helps :]

Water can take different paths while moving through water   cycle because of it's unique property to exist in different phases.

Water cycle is one of the biogeochemical cycles which describes the movement of water above and below the surface of earth. Mass of water remains constant but it's mass in different forms varies as it exists in form of  glaciers, water and water vapor.

Water gets converted from one form to another by processes such as evaporation,transpiration, condensation,precipitation and surface run off.During this , water changes it's phases from liquid to vapor and solid . Ocean plays a major role in water cycle as it is a source of 86% global evaporation of water.

It involves change in energy leading to changes in temperature. When it evaporates,it takes energy from surroundings and while condensing, it releases energy in to the environment. The evaporation phase purifies the water and then replenishes land with freshwater.

Learn more about water cycle ,here:

https://brainly.com/question/1151425

#SPJ2

Answer:

The predator-prey relationship helps to hold the populations of the two species in equilibrium. ... If the population of prey increases, there is more food for predators. So after a slight period, the predator population is also increasing. If the number of predators increases, more prey is captured.

Explanation:

Answer:

i eat you, you die

Explanation:

thats how life works

Answer:

26.982

Explanation:

Use the periodic table

Answer:

3 atm

1.6 g

Explanation:

Step 1: Given data

Step 2: Find partial pressure (P) of CO₂ gas

We will use Henry's law.

C = k × P

P = C / k

P = 0.1 M / 3.3 × 10⁻² M atm⁻¹

P = 3 atm

Step 3: Calculate the mass of CO₂ gas

The molar mass of carbon dioxide is 44.01 g/mol.

0.355 L × 0.1 mol/L × 44.01 g/mol = 1.6 g

Answer:

0 Kelvin is called Absolute Zero. Particles will stop moving, and lose all energy.

Answer: C

Explanation: Everything else is true.

Answer:

it is true bc i looked it up

Answer:

The hydronium ion concentration can be found from the pH by the reverse of the mathematical operation employed to find the pH. [H3O+] = 10-pH or [H3O+] = antilog (- pH).

I hope what I just explained is enough .

Answer:

It changes by roughly 1 atm.

Explanation:

Hello!

In this case, since the ideal gas equation differs from the van der Waals' one by the presence of the a and b parameters which correct the assumption of no interactions into the container, they are written as:

[tex]P=\frac{nRT}{V}\\\\P=\frac{RT}{v_m-b}-\frac{a}{v_m^2}[/tex]

Thus, the pressure via the ideal gas equation is:

[tex]P=\frac{0.300mol*0.082\frac{atm*L}{mol*K}*248K}{0.200L}=30.5atm[/tex]

And the pressure via the van der Waals equation, considering the molar volume (vm=0.200L/0.300L=0.667L/mol) is:

[tex]P=\frac{0.082\frac{atm*L}{mol*K}*248K}{0.667L/mol-0.0237L/mol}-\frac{0.0342atm*L^2/mol^2}{(0.667L/mol)^2}\\\\P=31.6atm-0.0769atm\\\\P=31.5atm[/tex]

It means that the pressure change by 1 atm, which is not a significant difference for helium.

The difference in pressure calculated by the two methods is 84 atm.

The ideal gas equation is given by

PV =nRT

From the data given in the question;

P = ?

V = 0.200 L

n =  0.300 mol

T = 248K

R = 0.082 atmLK-1Mol-1

P = nRT/V

P =  0.300 mol × 0.082 atmLK-1Mol-1  × 248K/0.200 L

P = 30.5 atm

From Van der Waals equation;

P = RT/V - b - a/V^2

P =  (0.082 × 248/0.200 - 0.0237)  - (0.0342/ 0.200^2)

P = 114.5 atm

The difference in pressure calculated by the two methods is;

114.5 atm -  30.5 atm = 84 atm

Learn more: https://brainly.com/question/5803619

Answer:

Molecular movement

Explanation:

When an object gets hotter, its molecules gain more kinetic energy and then move faster. Therefore, the fast-moving molecules will cause those around them to move faster as well, and the colder (or more slow-moving molecule object) object or part is heated up.

PLS GIVE BRAINLIEST