John is 70 years younger than Sharon. Sharon is 4 times as old as John.
If you let s = Sharon's age and j = John's age, then the problem can be represented by a system of equations. Which of the
following shows a graph of this system and the solution to this problem?
1

Answer:

A.) All reptiles run fast

Step-by-step explanation:

Tortoises are reptiles that run slow, so they would be a counterexample to the conjecture that all reptiles run fast. This is because tortoises are a type of reptile that do not run fast, even though the conjecture states that all reptiles do.

In general, reptiles are a class of animals that includes many different species. Some reptiles, such as snakes and lizards, are known for their speed and agility. However, other reptiles, such as tortoises and turtles, are not known for their speed and tend to move much slower than other reptiles. This shows that the conjecture that all reptiles run fast is not always true, and tortoises are a counterexample to this conjecture.

In addition to their speed, tortoises are also distinguished by their hard shells and thick legs. They are typically found in warm, dry environments, and they are known for their long lifespan and low metabolic rate. They are also typically herbivores, feeding on a diet of plants and vegetation. This is in contrast to other reptiles, such as snakes and lizards, which are often carnivorous and hunt for their food. Overall, tortoises are a unique and interesting group of reptiles that do not always fit the generalizations made about reptiles.

The angle in the similar triangles is as follows:

m∠N = 42 degrees

Similar triangles are the triangles that have corresponding sides in proportion to each other and corresponding angles equal to each other.

In other words, two triangles are said to be similar if their corresponding angles are congruent and the corresponding sides are in proportion.

Therefore, triangle JKL is similar to triangle NOP. This means the corresponding angles are congruent.

Hence,

∠J = ∠N

∠K = ∠O

∠L = ∠P

Therefore,

m∠N = 180 - 80 - 58(sum of angles in a triangle)

m∠N = 42 degrees

learn more on similar triangles here: https://brainly.com/question/29191745

#SPJ1

To calculate the total amount of interest that Edgar will owe on his credit card debt after 2 years of quarterly compounding at a 20% annual interest rate, we need to use the formula A = P(1 + r/n)^nt, where A is the total amount of money owed after t years, P is the initial principal (or amount borrowed), r is the annual interest rate, n is the number of times the interest is compounded per year, and t is the number of years. In this case, the initial principal is $9,000, the annual interest rate is 20%, the number of times the interest is compounded per year is 4 (since the interest is compounded quarterly), and the number of years is 2. Plugging these values into the formula, we get A = $9,000(1 + 0.20/4)^4 * 2 = $9,000(1.05)^8 = $9,000 * 1.4064 = $12,658.40. Thus, after 2 years of quarterly compounding at a 20% annual interest rate, Edgar will owe approximately $12,658.40 on his credit card debt. This result should be rounded to the nearest cent, giving us $12,658.40.

Answer:

  1, 4, 5

Step-by-step explanation:

You want to identify correct proportions between the sides of similar isosceles trapezoids ABCD and WXYZ.

The similarity statement tells us the corresponding side pairs are ...

A proper proportion will be equate ratios of the corresponding sides in the same trapezoid, or the corresponding sides in different trapezoids.

AB/WX = DA/ZW . . . . . . correct

AB/WX = ZW/DA . . . . . . incorrect

CB/XY = WX/AB . . . . . . incorrect

AB/WX = CB/YX . . . . . . correct

DA/AB = ZW/WX . . . . . . correct

BC/AD = XY/YZ . . . . . . incorrect

Answer:  12 row plans

The first seat has 2 possible options, the 2 directors. The second seat has another 2 options. With each director comes 2 options for the second seat, so 2 x 2=4 possible options for the 1st and 2nd seats. The third seat has 3 options. That means for each combination of the 1st and 2nd seat, there are 3 possible options. 4x3=12 combinations.

Step-by-step explanation:

Answer:

meter - yard

kilogram - 2 pounds

liter - quart

The required, team 3, tower garden donation shows the proportional relationship between weeks and donation,

Proportionality is described as the relationship between two or more sets of values, and whether these values are directly proportional or inversely proportionate to one other.

here,
From the table,
The ratio of a week to the donation of the individual team must be the same as the ratio of the preceding week and the donation of the respective team,
So,
Team 1,
1 / 1 =  2 / 3[1/4], false

Similarly, team 2 and team 4's relationship is also not proportional,
Now, team 3
1 / [2 1 / 3] = 2 / [4 2/3 ]
3 / 7 = 3/7

Thus, The necessary, team 3, tower garden gift illustrates the proportional relationship between weeks and donation.

Learn more about proportionality here: https://brainly.com/question/22620356

#SPJ1

Answer:

Step-by-step explanation:

the lateral area of the drawing the lateral area of the drawing is 40 mi2. Area rectangle = w * l 5 * 2 = 10 mi² (area 1 rectangle) then you multiply by 4 10 * 4 = 40 mi² or 5 * 2 * 4 = 40 mi²

Answer:

  294 m²

Step-by-step explanation:

You want the lateral area of a regular hexagonal prism with side lengths 7 m and height 7 m.

The lateral area is the sum of the areas of the 6 square faces.

Each of the 6 faces is a square 7 m on the edge. Its area is ...

  (7 m)² = 49 m²

There are 6 of these square faces, so their total area is ...

  6 × 49 m² = 294 m²

The lateral area of the prism is 294 m².

Answer:

  x = 7.2

Step-by-step explanation:

You want the value of x that makes ∠BCE = 45° = (5x +9)°.

Divide by ° and subtract 9 to get ...

  36 = 5x

Divide by 5, and you have the value of x:

  7.2 = x

The value of x is 7.2.

__

Additional comment

You know that the corner angles of a square are 90°, and that the diagonals bisect the corner angles. Each half is 45°.

Answer:

The number can be any value less than or equal to 100.

Thus, it can be any number in this range: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100]

Step-by-step explanation:

Firstly, let's convert the word problem into a math expression:

[tex]\frac{x}{5}+25\leq45[/tex]

We can now solve this inequality for the variable x.

[tex]\frac{x}{5} \leq 20[/tex]

[tex]x \leq 100[/tex].

Therefore x is any value less than or equal to 100.

Kurt will eat 1/6 cups more than Danielle if Kurt ate 1/3 of a cup of nuts and Danielle ate 1/6 of a cup of nuts by using ratio and proportion concept.

When b does not equal 0, an ordered pair of numbers a and b, represented as a / b, is said to be a ratio. Two ratios are set to be equal in an equation called a proportion. For instance, if there is 1 boy and 3 girls, the ratio would be written as 1: 3 (there are 3 girls for every boy), meaning that there are 1 in 4 boys and 3 in 4 girls.

A: b a/b is the ratio formula, which may be used to calculate any two values. A:b::c:da:b::c:da, on the other hand, is how the percentage formula is written. A ratio in mathematics displays the multiplicative relationship between two numbers.

Given,

A cup of nuts ate by Kurt=1/3

A cup of nuts ate by Danielle=1/6

(1/3)-(1/6)

=1/6

Therefore, Kurt will eat 1/6 cups more than Danielle.

To know more about proportion and ratio, visit;

https://brainly.com/question/26974513

#SPJ1

Step-by-step explanation:

The first, twelfth and last term of an arithmetic progression are and , respectively. Determine (a) the number of terms in the series, (b) the sum of all the terms and (c) the 80 th term

22>x>36 is the range for the third side's measurement when two sides of a triangle are measured at 7 km and 29 km.

Given that,

When the other two sides of a triangle are measured at 7 km and 29 km.

We have to determine the range for the third side's measurement.

We know that,

Take the measured sides.

7 km and 29 km

So, we can write as

The two sides added together are greater than the third side.

So, take one side as x

We get,

7+x>29

Taking 7 to the right side we get negative 7
x>29-7

x>22

Now taking 29 to left side and x to sides

7+29>x

36>x

Therefore, 22>x>36 is the range for the third side's measurement when two sides of a triangle are measured at 7 km and 29 km.

To learn more about range visit: https://brainly.com/question/28135761

#SPJ4

Answer:

< 1 = 64°

Step-by-step explanation:

First at all the sum of 2 angles should be 180°

< 3 + 116° = 180°

< 3 = 180 - 116

< 3 = 64°

Then, the sum of intern angles of a triangle must sum 180°, so:

< 1 + 52° + < 3 = 180°

< 1 +52 + 64 = 180

< 1 = 180 - 64 -52

< 1 = 64°

Geometric sequence has a common ratio.

Let's verify is the ratio of subsequent terms is common:

As wee se the ratio is common, it confirms that the sequence is geometric.

Common ratio is:

Answer:

Yes, the sequence is geometric.

[tex]\textsf{Common ratio}=\dfrac{2\sqrt{3}}{3}[/tex]

Step-by-step explanation:

Given sequence:

[tex]2, \; \dfrac{4}{\sqrt{3}},\; \dfrac{8}{3},\;\dfrac{16}{3\sqrt{3}},\;...[/tex]

A geometric sequence has a common ratio.

Therefore, to check if the given sequence has a common ratio, divide each term by the previous term:

[tex]\boxed{\begin{aligned}\dfrac{16}{3\sqrt{3}} \div \dfrac{8}{3}&=\dfrac{16}{3\sqrt{3}} \times \dfrac{3}{8}\\\\&=\dfrac{48}{24\sqrt{3}}\\\\&=\dfrac{2}{\sqrt{3}}\\\\&=\dfrac{2\sqrt{3}}{3}\end{aligned}}[/tex]

[tex]\boxed{\begin{aligned}\dfrac{8}{3} \div \dfrac{4}{\sqrt{3}}&=\dfrac{8}{3} \times \dfrac{\sqrt{3}}{4}\\\\&=\dfrac{8\sqrt{3}}{12}\\\\&=\dfrac{2\sqrt{3}}{3}\end{aligned}}[/tex]

[tex]\boxed{\begin{aligned} \dfrac{4}{\sqrt{3}} \div 2&= \dfrac{4}{\sqrt{3}} \times \dfrac{1}{2}\\\\&= \dfrac{4}{2\sqrt{3}} \\\\&=\dfrac{2}{\sqrt{3}}\\\\&=\dfrac{2\sqrt{3}}{3}\end{aligned}}[/tex]

As there is a common ratio, the sequence is geometric.

The common ratio is:

Assuming that the meal cost $50, the Shapley values (payments) for each player is: number of possible combination , Player 1: $15 , Player 2: $10 , Player 3: $10 , Player 4: $15

1. Calculate the marginal contribution of each player. This is the amount of money that each player adds to the total cost of the meal.

Player 1: $25

Player 2: $15

Player 3: $10

Player 4: $0

2. Calculate the Shapley Value for each player. This is calculated by taking the average of the marginal contribution of each player, weighted by the number of possible combinations they could have been in.

Player 1: ($25*3 + $15*2 + $10*1 + $0*0) / 6 = $15

Player 2: ($25*2 + $15*3 + $10*2 + $0*1) / 6 = $10

Player 3: ($25*1 + $15*2 + $10*3 + $0*2) / 6 = $10

Player 4: ($25*0 + $15*1 + $10*2 + $0*3) / 6 = $15

Learn more about number here

https://brainly.com/question/10547079

#SPJ4

Answer:

g(x) = 4x - 3

Step-by-step explanation:

f(x) = 2x − 3

g(x) = f(2x)

g(x) = 2(2x) - 3  ==> plugin 2x for x in f(x) in order to get f(2x)

g(x) = 4x - 3

The rent per unit should be $8,354.22 to generate a Net Operating Income (NOI) of $100,000, given the vacancy rate and operating expenses.

The operating expenses are costs that must be deducted from the gross operating income to arrive at the net operating income.

The operating expenses do not include some period expenses, which are indirect costs.

                                                                                            Total

Rent per unit (per month) = $696.19 ($8,354.22/12)   $150,376

Vacancy Rate (5% of Potential Gross Income)                   7,519

Effective Gross Income                                                $142,857

Operating Expenses (30% of Effective Gross Income) 42,857

Net Operating Income (NOI)                                      $100,000

Number of Units 18

Gross operating income = net operating income + operating expenses

Operating expenses = 30% of effective gross income

Net operating income = 70% of effective gross income (100 - 30%)

= $100,000

Effective Gross Income (100%) = $142,857 ($100,000 ÷ 70%)

Vacancy rate = 5% of potential gross income

Effective Gross Income = 95% (100 - 5)

Potential gross income = $150,376 ($142,857 ÷ 95%)

Number of units = 18

Rent per unit = $8,354.22 ($150,376/18)

Rent per month = $696.19 ($8,354.22 ÷ 12)

Thus, a rent of $8,354.22 per unit can generate a Net operating income of $100,000.

Learn more about the net operating income at https://brainly.com/question/26206936

#SPJ1

Answer:

The empirical rule states that for a bell-shaped distribution, approximately 68% of the data values will fall within one standard deviation of the mean, 95% of the data values will fall within two standard deviations of the mean, and 99.7% of the data values will fall within three standard deviations of the mean.

Using this information, we can calculate the range of values that fall within two standard deviations of the mean for the given data set:

Mean: $1200

Standard deviation: $100

Two standard deviations: $200

Therefore, the range of values that fall within two standard deviations of the mean is $1200 - $200 = $1000 to $1200 + $200 = $1400.

With this information, we can determine which of the given data values are unusual (more than two standard deviations from the mean):

$1064 is within two standard deviations of the mean.

$1417 is outside of two standard deviations of the mean.

$1373 is within two standard deviations of the mean.

$856 is outside of two standard deviations of the mean.

$1250 is within two standard deviations of the mean.

$1102 is within two standard deviations of the mean.

Therefore, the data values $1417 and $856 are unusual (more than two standard deviations from the mean).

We can also determine which of the given data values are very unusual (more than three standard deviations from the mean) using the same process. The range of values that fall within three standard deviations of the mean is $1000 to $1600. With this information, we can see that none of the given data values are very unusual (more than three standard deviations from the mean).

Answer:

x=-2

y = 3× -2 + 4

y= -6 + 4

y = -2

Answer:

The circumference of a corcle is double the perimeter of square having area 484 m^2. what is the area of the circle. Ans:2464 cm^2.

Answer:

Hence the area of a circle is 2466[tex]m^{2}[/tex]

Step-by-step explanation:

Review of the question

[tex]Given,[/tex]

Area of the circle

,

Area of square =[tex]sideXside[/tex]

[tex]484[/tex]=[tex]side^{2}[/tex]

[tex]\sqrt{484}=side^{2}[/tex]

[tex]22 = side[/tex]

Perimeter of square = [tex]4Xside[/tex]

[tex]4X22[/tex]

[tex]88[/tex]

Circumference of the circle = Perimeter of square  x 2

Circumference of the circle = 88x2

Circumference of the circle = 176

Now we need to find the radius of the circle

[tex]2\pi r=176[/tex]

[tex]2X3.14Xr=176\\6.28Xr=176\\r=\frac{176}{6.28} \\r=28.025477707[/tex]

Area of the circle=[tex]\pi r^{2}[/tex]

[tex]3.14X[/tex][tex](28.025477707)^{2}[/tex]

[tex]2466[/tex]

Hence the area of a circle is 2466[tex]m^{2}[/tex]

Answer:

pls rate as brainliest it will go a long way

Step-by-step explanation:

(x–1)(x+2)

STEP 1

using the first bracket to expand the other

= x(x + 2) –1(x + 2)

= x² + 2x –x –2

= x² + x – 2

Step 2

or by using the other bracket to expand the other

(x – 1)(x + 2)

x(x – 1) + 2(x – 1)

= x² – x + 2x – 2

= x² + x – 2

By using properties of triangle, it can be calculated that-

t = 60°

u = 8

What is a triangle?

A triangle is a three sided two dimensional figure. A triangle has three sides and three interior angles.

Based on the sides of a triangle, triangle may be classified as equilateral, isosceles and scalene

Triangle whose all three sides are equal is called equilateral

Triangle whose two sides are equal is called isosceles

Triangle whose all sides are unequal is called scalene

Here,

[tex]\angle[/tex]FGE = 90°

[tex]\angle[/tex]GFE = 30°

[tex]\angle FEG[/tex] = 180 - (90 + 30)

           = 180 - 120

           = 60°

t = 60°

Since FE = HE and [tex]\Delta[/tex]FGE and  [tex]\Delta[/tex]FGE are right angle triangles,

So FG = FH

u = 8

To learn more about triangle, refer to the link-

https://brainly.com/question/1058720

#SPJ1

Measure of angle ABE is 47°.

An angle is a figure in Euclidean geometry made up of two rays that share a common terminal and are referred to as the angle's sides and vertices, respectively. Angles created by two rays are in the plane where the rays are located. The meeting of two planes also creates angles. We refer to these as dihedral angles. The angle formed by the rays lying perpendicular to the two crossing curves at the point of junction is another property of intersecting curves. Angle can also refer to the length of a rotation or an angle. This metric represents the relationship between a circular arc's length and radius.

Given

∠CBE = 43°

As we know, ∠ABC is a right angle

∠ABC = ∠ABE + ∠CBE

90 = ∠ABE +43

∠ABE = 90 - 43

∠ABE = 47

Measure of angle ABE is 47°.

To learn more about angle, visit:

https://brainly.com/question/28451077

#SPJ1

Step-by-step explanation:

The firm should manufacture 50 units of product I, 100 units of product II, and 100 units of product III each week to meet all contractual obligations and maximize its total profit.

To set up the mathematical model for this problem, we can use variables to represent the number of units of each product that the firm manufactures each week. Let x1 be the number of units of product I, x2 be the number of units of product II, x3 be the number of units of product III, and x4 be the number of units of product IV.

The first constraint is that the firm has a contract to provide 50 units of product I and 100 units of any combination of products II and III each week. This can be represented as:

x1 = 50

x2 + x3 = 100

The second constraint is that the firm has a maximum of 480 hours of machining time, 400 hours of polishing time, and 400 hours of assembling time each week. The time required for each product can be represented as:

x16 + x28 + x34 + x410 <= 480 (machining time)

x14 + x26 + x32 + x48 <= 400 (polishing time)

x14 + x24 + x34 + x46 <= 400 (assembling time)

The third constraint is that the firm can sell as many units of products I, II, and III as it can produce, but only a maximum of 25 units of product IV. This can be represented as:

x1 >= 0

x2 >= 0

x3 >= 0

x4 <= 25

The objective is to maximize the firm's total profit, which is the sum of the profits for each product. The unit profits for each product are Birr 360, Birr 240, Birr 360, and Birr 480, respectively. The total profit can be represented as:

360x1 + 240x2 + 360x3 + 480x4

The complete mathematical model for this problem is:

Maximize: 360x1 + 240x2 + 360x3 + 480x4

Subject to:

x1 = 50

x2 + x3 = 100

x16 + x28 + x34 + x410 <= 480

x14 + x26 + x32 + x48 <= 400

x14 + x24 + x34 + x46 <= 400

x1 >= 0

x2 >= 0

x3 >= 0

x4 <= 25

This model can be solved using linear programming techniques to find the values of x1, x2, x3, and x4 that maximize the total profit while satisfying all of the constraints. In this case, the optimal solution is x1 = 50, x2 = 100, x3 = 100, and x4 = 0, which corresponds to manufacturing 50 units of product I, 100 units of product II, and 100 units of product III each week. This meets all of the contractual obligations and maximizes the total profit.

The objective is to maximize total profit, which is given as

P = 360 [tex]x_1[/tex]+ 240[tex]x_2[/tex]+ 360[tex]x_3[/tex] + 480[tex]x_4[/tex]

The goal of the Linear Programming Problems (LPP) is to determine the best value for a given linear function. The ideal value may be either the highest or lowest value. The specified linear function is regarded as an objective function in this situation.

Let[tex]x_1[/tex] , [tex]x_2[/tex],  [tex]x_3[/tex] and  [tex]x_4[/tex] be the number of units of product I, II, III and IV to be produced, respectively.

The constraints are that the time requirements for each product should not exceed the available time, the firm is contractually obligated to produce 50 units of product I and 100 units of products II and III, and the firm can sell at most 25 units of product IV.

These constraints can be written mathematically as:

3[tex]x_1[/tex]  + 2 [tex]x_2[/tex]+ 2 [tex]x_3[/tex]   + 4[tex]x_4[/tex] ≤ 480  (Machining)

[tex]x_1[/tex] +  [tex]x_2[/tex] +  [tex]x_3[/tex]   + 3[tex]x_4[/tex] ≤ 400  (Polishing)

2[tex]x_1[/tex]  +  [tex]x_2[/tex]+ 2 [tex]x_3[/tex]  + [tex]x_4[/tex] ≤ 400 (Assembling)

and, [tex]x_1[/tex]  ≥ 50 (Product I)

[tex]x_2[/tex] +  [tex]x_3[/tex]  ≥ 100 (Products II and III)

[tex]x_4[/tex] ≤ 25 (Product IV)

[tex]x_1[/tex] , [tex]x_2[/tex],  [tex]x_3[/tex]  , [tex]x_4[/tex] ≥ 0

Learn more about Linear Programming Problem here:

https://brainly.com/question/29405467

#SPJ2

No information is given for x and it can be fraction or real number, so option D is correct.

What is fraction ?

A fraction is a part of a whole. In arithmetic, the number is expressed as a quotient, in which the numerator is divided by the denominator. In a simple fraction, both are integers. A complex fraction has a fraction in the numerator or denominator. In a proper fraction, the numerator is less than the denominator.

Fractions represent the parts of a whole or collection of objects. A fraction has two parts. The number on the top of the line is called the numerator.

It tells how many equal parts of the whole or collection are taken.

No information is given for x and it can be fraction or real number, so option D is correct.

To learn more about fraction visit:

brainly.com/question/10354322

#SPJ4

Answer:

False

Step-by-step explanation:

False. A material in which thermal energy is transferred slowly is actually an insulator. A conductor is a material that easily allows the transfer of thermal energy. This is because conductors have loosely bound electrons that can move freely through the material, allowing heat to be easily transferred. Examples of good conductors include metals such as copper, aluminum, and silver. On the other hand, insulators have tightly bound electrons that do not move easily, making them poor conductors of heat. Examples of good insulators include materials like glass, plastic, and rubber.

By using the formula for area of parallelogram, it can be calculated that

Felix needs to buy 80 [tex]cm^2[/tex] of tiles

What is area of parallelogram?

Area of parallelogram is the total space taken by the parallelogram.

If b is the base of the parallelogram and h is the height of the parallelogram, then area of the parallelogram is calculated by the formula

Here,

Base of each parallelogram = 4cm

Height of each parallelogram = 2cm

Area of  each parallelogram = 4 [tex]\times[/tex] 2 = 8 [tex]cm^2[/tex]

Area of 10 parallelograms = 8 [tex]\times[/tex] 10 =  80 [tex]cm^2[/tex]

Felix needs to buy 80 [tex]cm^2[/tex] of tiles

To learn more about area of parallelogram, refer to the link-

https://brainly.com/question/24291122

#SPJ1

Complete Question

The full diagram has been attached.

Answer:

23328

Step-by-step explanation:

since it is a geometrics sequence we will use the formula

[tex] {ar}^{n - 1} [/tex]

The first term(a) = 3

The second term = ar = 18

divide the first term and second term to find the common ratio

[tex] \frac{t2}{t1} = \frac{ar}{a} = \frac{18}{3} [/tex]

r = 6

Now lets find the sixth term

[tex]t6 = {ar}^{6 - 1} [/tex]

[tex]t6 = {ar}^{5} [/tex]

by substituting for the values

[tex]t6 = 3 \times {6}^{5} [/tex]

= 3 × 7776

= 23328

i hope this helped

Answer:

[tex]a_{6} = 23,328[/tex]

Step-by-step explanation:

⭐ Geometric Progression formula: [tex]a_{n} = a_1(b)^{n-1}[/tex]

We are given that [tex]a_{1}[/tex] = 3. Now, we need to find b.

b is the quotient of [tex]\frac{a__3}{a__2}[/tex].

Let's substitute the first term and common ratio into the formula.

[tex]a_n = 3(6)^{n-1}[/tex]

The problem wants us to solve for the 6th term, so we have to substitute 6 for n and solve.

[tex]a_6 = 3(6)^{6-1}\\a_6 = 3(6)^5\\a_6 = 3(7,776)\\a_6 = 23,328[/tex]

Answer:

Step-by-step explanation:

4/4

8/6

4/6