What are the two types of malicious code?

Answer: 16,777,216

A class C network has 2^24 (16,777,216) IP addresses. This is because the first three octets (groups of 8 bits) in the IP address are reserved for the network address, and the final octet is used for the host address. Since there are 8 bits in an octet, this means that there are 2^8 (256) possible values for each octet. In a class C network, the first three octets are set to a specific value, so there are only 2^8 (256) possible values for the final octet, which corresponds to the host address. This means that a class C network has 256 x 256 x 256 = 16,777,216 possible IP addresses.

Through defend against SMB attacks, a network should filter out ports 137 to 139 and 445. Network file sharing has always been possible with SMB.

You can stop the NetBIOS service from being misused in addition to turning it off by blocking TCP & UDP port 137 in your Windows firewall.

From User Exec Mode, we input the "Enable" command to enter Privileged Mode. If enabled, you will be prompted for a password by the router. Once we are in Privileged Mode, you will note that the prompt switches from ">" to a "#" to let you know that we are there.

To know more about SMB visit :-

https://brainly.com/question/14839707

#SPJ4

Fossil fuels form in this type of environments: C. anaerobic.

In Science, a non-renewable resource can be defined as an energy source that generally takes a very long time to be created or an energy source whose creation happened a long time ago and isn't likely to happen again in the future.

Additionally, a non-renewable resource simply refers to an energy source that is both inexhaustible and irreplaceable such as the following:

In conclusion, fossil fuels typically forms during the anaerobic decomposition of buried dead organisms, which comprises organic molecules that are created through photosynthesis.

Learn more about non-renewable resource here: https://brainly.com/question/26237167

#SPJ1

it is an Arraysize-1 index that always starts at zero. If arrasize is 100, the range of the array's index or subscript is 0 to 99. Most languages, including C, C++, Java, C#, etc., adhere to this norm.

Using subscripts to provide table references is known as subscripting. A subscript is a positive integer whose value identifies the quantity of times a table element appears in the table.

Any qualifiers for the name of the table element are written after the subscripts, which are wrapped in parentheses. Such a reference must have an equivalent number of subscripts as there are dimensions in the table whose element is being referred. In other words, every OCCURS clause in the hierarchy that contains the data-name, including the data-name itself, must have a subscript.

When more than one subscript is necessary, they are expressed in the order of the data organization's increasingly less inclusive dimensions. Considering a multidimensional table as a collection of stacked

Learn more about Subscript here:

https://brainly.com/question/17327794

#SPJ4

In a computer catalog, the diagonal distance of a computer monitor screen is labeled as 21 inches. If the screen measures 14 inches in height, 245 in.  is the width of the screen .

How do I monitor and respond?

A monitor is a type of electronic visual computer display that consists of a screen, circuitry, and the housing for the equipment. Cathode ray tubes (CRT) were used in older computer monitors, which led to their size, weight, and inefficiency.

What purpose does a monitor serve?

Computer video output is displayed on a display monitor, which is an electronic gadget. From personal computers (PCs) and laptops to small handheld mobile devices, including cellphones and MP3 players, display displays are a common component in a variety of computer hardware.

Learn more about monitor

brainly.com/question/3799624

#SPJ4

Globalization is describes the trend toward a world that is more interconnected by technology, trade, and travel.

What is Globalization ?

The term "globalization" refers to the increasing interdependence of the world's economies, cultures, and inhabitants as a result of cross-border trade in commodities and services, technology, and flows of capital, labor, and information.

What, in your view, is globalization?

Globalization refers to the accelerated movement and exchange of things like people, money, commodities and services, technology, and cultural norms around the globe.

                    The promotion and expansion of interactions between various communities and places around the world is one of the implications of globalization.

Learn more about Globalization

brainly.com/question/15283031

#SPJ4

False, A word processor or spreadsheet's special binary formatting codes are mixed with alphanumeric ascii characters in a numerical input file.

What is spreadsheet?
A spreadsheet is a computer application used to organize and analyze data. It is a type of software program that allows users to create, store and manipulate data in a tabular form. Spreadsheets are typically organized in columns and rows, and can contain formulas, functions, charts and other features. Spreadsheets are useful for financial analysis, budgeting, data entry, and to track information. They can be used to create budgets, manage accounts, calculate taxes, and perform statistical analysis. Spreadsheets are also used to automate processes and make complex calculations. Spreadsheets are extremely flexible and are used in many different industries and applications. They are an important tool in modern businesses, providing a powerful way to manage and analyze data.

To learn more about spreadsheet
https://brainly.com/question/26919847
#SPJ1

"Intranets are private corporate networks extended to authorized users outside the organization" is false.

Corporate networks vary from the group in that they retain formal relationships with one another through contracts (franchises, concessions, etc.) between both business units rather than through the use of financial linkages.

With an extended network, you are linked to another carrier's tower to receive service because your network does not contain any towers in that region.

Simply switch off Airplane Mode after a short period of time while keeping your smartphone in that mode.

"Intranets are private corporate networks extended to authorized users outside the organization" is false.

More about the corporate network extended link is given below.

https://brainly.com/question/14809186

#SPJ4

Answer:

False

Explanation:

An algorithm is NOT a guiding rule used to solve problems or make decisions.

The effect that occurs when moving from one slide to another in a presentation is known as Slide transition. Thus, the correct option for this question is C.

Slide presentation may be defined as a series of presentations of photographic slides, or images on a transparent base, placed in a projector and viewed sequentially on a screen.

A slide transition is a visual effect that occurs when you move from one slide to the next during a presentation. You can control the speed, add sound, and customize the look of transition effects.

Therefore a slide transition is an effect that occurs when moving from one slide to another in a presentation. Thus, the correct option for this question is C.

To learn more about Slide transition, refer to the link:

https://brainly.com/question/1481663

#SPJ1

Since Jerome wants something to happen when the user hovers over a div called recipes. The  line of CSS that should be used is option D.

#recipes:hover{.

To style a specific HTML element, use inline CSS. Selectors are not necessary for this CSS style; you only need to add the style property to each HTML tag.

Given the necessity to design each HTML tag separately, this CSS type is not really advised. If you simply utilize inline CSS, managing your website could become too challenging.

Therefore, You must include the style> tag in the head> section of your HTML document when using internal or embedded CSS.

Learn more about CSS from

https://brainly.com/question/28406064
#SPJ1

is it possible to give a more clearer image?

You can use the ss commands to output socket information on the terminal screen.

For each network interface on a Windows system, the ipconfig command provides the fundamental IP addressing details. Both the IP address and the subnet mask are included in this data.

Port 53 (UDP) (UDP) Accessing DNS servers requires using this port. For the client to be able to resolve public domain names, it must be open to your DNS server IP addresses. If you don't use DNS servers for domain name resolution, you can ignore this port requirement.

To know more abou terminal screen. visit :-

https://brainly.com/question/29306891

#SPJ4

If the compatibility with the cable type and wavelength in use is not carefully checked, transmitter mismatch layer 1 troubleshooting issues may develop.

If you are having trouble with your internet signal, you should restart your modem and router right away. Do not omit this phase! Since it frequently resolves the issue, this is nearly always what tech support will advise you to try first.

Check the cables frequently: An easy first step to take if you're experiencing issues with a particular piece of computer hardware, such your keyboard or monitor, is to make sure all linked cables are in good condition. They are suitably linked. Restart the computer: Restarting the computer is a solid option to attempt if all else fails.

To know more about layer troubleshooting visit:-

https://brainly.com/question/13041616

#SPJ4

Question:

Which Layer 1 troubleshooting issue can occur from not carefully ensuring compatibility with cable type and wavelength in use?

A) Transceiver mismatch

B) Crosstalk

C) dB loss

D) Opens and shorts

A dimension table is a table in a data warehouse's star schema. A dimension table keeps the dimensions or qualities that define the items in a fact table. In data warehousing, a dimension is a group of references data about a quantifiable event.

A dimension table contains information on the various ways the fact table's data can be studied, while a fact table contains the data that will be evaluated.

Because it allows you to track historically important features, type 2 is the most popular sort of slowly changing dimension.

To know more about dimension table visit :-

https://brainly.com/question/13106855

#SPJ4

Each column cannot be part of multiple column families in case of column-family nosql databases.

NoSQL databases, also referred as "not merely SQL," are non-tabular databases that store data in various ways from relational tables. Depending on their data model, NoSQL databases can be classified as several categories. The primary types include wide-column, graph, document, and key-value. With a lot of data and a lot of users, they scale well and offer customizable schemas.

There are distinct qualities seen in every NoSQL database. High-level characteristics of several NoSQL databases include:

Four main categories of NoSQL databases have developed over time:

To learn more about databases refer to:

https://brainly.com/question/518894

#SPJ1

Using a method called MAC address filtering, a network administrator can limit access to a network based on the physical addresses of wireless NICs.

An administrator can restrict access to a network based on the physical addresses of wireless NICs using a technique known as MAC address filtering.

MAC filtering is typically located in the settings under Advanced Settings, Security, Access Control, or a section that is similar to these.

The precise location will depend on the router's brand.

There are two filtering options available for you to select from inside: Use a blacklist to block access to particular MAC addresses.

A MAC address filter gives the illusion of security but offers no true protection.

Therefore, it ought to be regarded as dangerous.

Use WPA2 to restrict access to certain devices if necessary.

Therefore, using a method called MAC address filtering, a network administrator can limit access to a network based on the physical addresses of wireless NICs.

Know more about MAC address filtering here:

https://brainly.com/question/14527362

#SPJ4

Answer:

It is generally possible to upgrade the amount of memory (also known as RAM) in a computer by installing additional memory modules. However, the maximum amount of memory that a computer can support is determined by the motherboard, which is the main circuit board in a computer that houses the processor, memory, and other components.

To determine whether you can use the existing memory modules to upgrade to the maximum amount of supported memory, you will need to check the specifications of your motherboard to see what the maximum amount of memory is that it can support. You can usually find this information in the documentation for your motherboard or by looking up the specifications online.

Once you know the maximum amount of memory that your motherboard can support, you can compare this to the total amount of memory that you currently have installed. If the total amount of memory you have installed is less than the maximum amount of memory that your motherboard can support, you can add additional memory modules to increase the total amount of memory.

It is important to note that you will need to use memory modules that are compatible with your motherboard. This usually means using memory modules with the same type of memory (such as DDR3 or DDR4) and the same physical form factor (such as DIMM or SO-DIMM). You should also make sure that the memory modules you are using are compatible with your processor and operating system.

False manual log analysis is favored since it is more likely to spot unusual activities.

A security principal or security group can be identified specifically using a security identifier. Security principals can represent any entity that the operating system is capable of authenticating, including user accounts, computer accounts, and processes that are active within the security context of these accounts.

A term that is preceded or followed by a single number, or a single word, should be avoided. Hackers will try to guess your password using word lists and passwords that are frequently used.

To know more about log analysis visit :-

https://brainly.com/question/29843087

#SPJ4

Usually, a network interface card is used to link a computer to a router. A separate LAN card is not required today because the majority of modern PCs have NIC cards integrated into the motherboard.

A computer's NIC offers a dedicated, constant connection to a network. It implements the physical layer hardware needed to communicate with a data link layer standard, such as Ethernet or Wi-Fi. Each card functions as a device and has the capacity to organize, transmit, and control the flow of data throughout the network. NICs are directly linked to the motherboard of your computer, either near the USB ports on the back or on the back of the computer (for external network expansion cards) (for onboard NICs). These cards are still extensively used for desktop PCs that lack a motherboard-integrated Ethernet port. Together with other networking devices, NICs are used to establish a connection to a network. Utilizing NICs, only other devices can be connected to. You need a router in order to connect to the internet. Routers are what connect a local network to the internet.

Learn more about network interface card here

https://brainly.com/question/20689912

#SPJ4

Here is the solution to the MathTrick program:

public class MathTrick {

 // Step 1) Creates a random 3-digit number where the first and third digits differ by more than one

 // Hint: use modulus for the last digit and divide by 100 for the first digit.

 public static int getRandomNum() {

   int num = 0;

   int firstDigit = 0;

   int lastDigit = 0;

   // complete the method

   firstDigit = (int)(Math.random() * 9) + 1; // generates a random number from 1 to 9

   lastDigit = (firstDigit + (int)(Math.random() * 3) + 2) % 10; // generates a random number from 2 to 4 more than firstDigit, and takes the modulus to ensure it is a single digit

   num = Integer.parseInt(String.valueOf(firstDigit) + "0" + String.valueOf(lastDigit)); // concatenates the first and last digits to form a 3-digit number

   return num;

 }

 // Step 2 & 4) reverse the digits of a number

 public static int reverseDigits (int num) {

   // complete the method

   String numStr = String.valueOf(num); // convert num to a string

   numStr = new StringBuilder(numStr).reverse().toString(); // reverse the string using a StringBuilder

   return Integer.parseInt(numStr); // convert the reversed string back to an integer and return it

 }

 // Step 7) replace characters in a string according to the chart

 public static String replaceLtr(String str) {

   // complete the method

   str = str.replace('0', 'Y');

   str = str.replace('1', 'M');

   str = str.replace('2', 'P');

   str = str.replace('3', 'L');

   str = str.replace('4', 'R');

   str = str.replace('5', 'O');

   str = str.replace('6', 'F');

   str = str.replace('7', 'A');

   str = str.replace('8', 'I');

   str = str.replace('9', 'B');

   return str;

 }

 // Step 8) reverse the letters in a string

 public static String reverseString(String str) {

   // complete the method

   return new StringBuilder(str).reverse().toString(); // reverse the string using a StringBuilder

 }

 public static void main(String[] args) {

   // 1. Generate a random 3-digit number so that the first and third digits differ by more than one.

   int num1 = getRandomNum();

   // 2. Now reverse the digits to form a second number.

   int num2 = reverseDigits(num1);

   // 3. Subtract the smaller number from the larger one.

   int result = Math.max(num1, num2) - Math.min(num1, num2);

   // 4. Now reverse the digits in the answer you got in step 3 and add it to that number.

   result += reverseDigits(result);

   // 5. Multiply by one million.

   result *= 1000000;

   // 6. Subtract 733,361,573.

The MathTrick program is a program that generates a random 3-digit number where the first and third digits differ by more than one, then reverses the digits to form a second number. It then subtracts the smaller number from the larger one, reverses the digits in the answer and adds it to that number, multiplies the result by one million, and finally subtracts 733,361,573. It also includes methods to replace the digits in the final result with letters according to a given chart, and to reverse the letters in a string. The program is meant to demonstrate the use of various methods from the Math class and the String class in Java.

Learn more about code, here https://brainly.com/question/497311

#SPJ4

The value chain's core functions include inbound logistics, operating outbound logistics, marketing and sales, and service.

To learn more about chain activities refer

https://brainly.com/question/24245161

#SPJ4

Criminals' accounts usually use stolen funds that the P2P payment service will eventually flag as a fraud.

What does licensing agreement mean?

An agreement between two parties (the licensor and licensee) known as a licensing agreement allows the licensee the right to utilize the brand name, trademark, copyrighted technology, or the capacity to create and sell items that the licensor owns.

What does a software license agreement serve?

With the aid of a software license agreement, a licensee can use software but not actually own it.

                      The rights to sell the program to others and to allow the licensee to use it on a single computer are retained by the software creator but are not granted to the licensee.

Learn more about P2P payment service

brainly.com/question/26922269

#SPJ4

The  three specific programming situations that require a posttest loop in c++ are:

The specific programming situations examples  are said to be explained below

Repeating an action until a specific condition is met:

do {

 // code to be executed

} while (condition);

In this case, the code inside the loop will be executed repeatedly until the condition specified in the while statement becomes false.

Validating user input:

do {

 // code to prompt user for input and store it in a variable

 cout << "Enter a number between 1 and 10: ";

 cin >> input;

} while (input < 1 || input > 10);

Lastly, Processing a list of items:

do {

 // code to process the current item

 // update the loop variable and test for the end of the list

} while (current_item != end_of_list);

Learn more about programming from

https://brainly.com/question/23275071

#SPJ1

Using the knowledge of computational language in JAVA it is possible to write a code that Use math methods to construct an expression Problem Description and Given Info Rosie's Road Co.

#include<stdio.h>

int main()

{

def _operator_fallbacks(monomorphic_operator, fallback_operator):

   def forward(a, b):

       if isinstance(b, (int, Fraction)):

           return monomorphic_operator(a, b)

       elif isinstance(b, float):

           return fallback_operator(float(a), b)

       elif isinstance(b, complex):

           return fallback_operator(complex(a), b)

       else:

           return NotImplemented

   forward.__name__ = '__' + fallback_operator.__name__ + '__'

   forward.__doc__ = monomorphic_operator.__doc__

   def reverse(b, a):

       if isinstance(a, Rational):

           # Includes ints.

           return monomorphic_operator(a, b)

       elif isinstance(a, Real):

           return fallback_operator(float(a), float(b))

       elif isinstance(a, Complex):

           return fallback_operator(complex(a), complex(b))

       else:

power_pipes = (5280 * rlm)/ 20;

water_pipes = (5280 * rlm)/15;

crew_member = (50 * rlm * nl)/ days;

printf("=== Amounts of Materials Needed ====\n");

printf("TruckLoads of Asphalt: %d\n",no_truckloads);

printf("Spotlights: %d\n", sptlight);

printf("Water Pipes :%d\n", water_pipes);

printf("Power Pipes : %d\n", power_pipes);

printf("Crew members needed: %d\n", crew_member);

spotlight_cost = sptlight * 32000;

wp_rs = water_pipes* 280;

pp_rs = power_pipes *350;

cost_labor = crew_member * 24 * 8 * days;

cost_asphalt = no_truckloads * 5 * 250;

printf("\n=== Cost of Materials ===\n");

printf("Cost of Asphalt: $%f\n", cost_asphalt);

printf("Cost of Spotlights : $%f\n", spotlight_cost);

printf("Cost of Water Pipes : $%f\n",wp_rs);

printf("Cost of Power Pipes : $%f\n", pp_rs);

printf("Cost of Labor : $%f\n", cost_labor);

printf("=== Total Cost of Projects ===\n");

printf("Total cost of projects : $ %lf\n", total_cost_pr);

return 0;

}

See more about JAVA at brainly.com/question/29897053

#SPJ1

To change the header or footer, select Custom Header or Custom Footer. To add the header or footer information you desire in the Left, Center, or Right section, click the Left, Center, or Right section box, followed by any of the buttons.

Click Custom Header or Custom Footer in the Page Setup dialog box's Header/Footer tab. Select the Left section, Center section, or Right section boxes to determine where you want the page number to appear in the header or footer. In the chosen section, the placeholder &[Page] appears.

Therefore, Then select Header and Footer from the Insert menu. Depending on where you want the date or time to appear, click in the Left, Center, or Right areas of the Header or Footer.

Learn more about Header here:

https://brainly.com/question/29840345

#SPJ4

Answer:

use ssd

Explanation:

ssd is fast

if you have limited fund

then hard drive is good not for speed but for data capacity

By deducting the gain ratio of the splitting from the index of both the parent node, it is possible to determine the increase in the gain coefficient when dividing on a and b.

What is algorithm?

An algorithm is a set of instructions or steps that are designed to solve a problem or accomplish a task. It is an effective way of performing a task that can be repeated, with the same results each time. Algorithms are commonly used in computer programming and can range from simple to complex. They can be used to solve simple tasks such as sorting a list, to complex tasks such as playing a game of chess. Algorithms are also used in everyday life, such as when a person follows a recipe or drives to a destination. Algorithms help to make tasks easier and more efficient by breaking them down into smaller, manageable steps.
The information gain when splitting on a and b can be calculated by subtracting the entropy or gini index of the split from the entropy or gini index of the parent node. The attribute with the highest information gain would be chosen by the decision tree induction algorithm. The gain in the gini index when splitting on a and b can be calculated by subtracting the gini index of the split from the gini index of the parent node. The attribute with the highest gain in the gini index would be chosen by the decision tree induction algorithm. Yes, entropy and the gini index are both monotonously increasing on the range [0, 0.5] and monotonously decreasing on the range [0.5, 1].

To learn more about algorithm.
https://brainly.com/question/24953880
#SPJ4

Authorized holder of the information at the time of creation. is responsible for applying CUI markings and dissemination instruction

What is CUI?
A CUI (common user interface) is a user interface designed to provide a consistent way of interacting with a computer system, regardless of the underlying hardware or software technology. It is a graphical user interface (GUI) that provides a unified look and feel across all programs and devices, allowing users to easily access and use them. The CUI also simplifies the process of learning how to use a computer by providing a unified, intuitive way for users to interact with the system. The CUI can include windows, menus, buttons, icons, and other graphical elements that allow users to access and manipulate data.

To learn more about CUI
https://brainly.com/question/24847632
#SPJ1

Answer:

FTP

Explanation:

FTP is used for file transfers between one system and another, and it has several common use cases, including the following: Backup. FTP can be used by backup services or individual users to backup data from one location to a secured backup server running FTP services.