what is the momentum of a baseball with a mass of 2kg being thrown at a velocity of 85m/s forwards the hitter?​

Answers

Answer 1

Answer:

170 kg m/s

Explanation:

The momentum of an object can be found by using the formula

momentum = mass × velocity

From the question we have

momentum = 2 × 85

We have the final answer as

170 kg m/s

Hope this helps you


Related Questions

17 Which changes decrease the rate of reaction between magnesium and air?
1.heating the magnesium to a higher temperature
2.using a higher proportion of oxygen in the air
3.using magnesium ribbon instead of powdered magnesium
A 1, 2 and 3
B 1 only
C 2 only
D 3 only​

Answers

Im pretty sure the answer is d

Using magnesium ribbon instead of powdered magnesium decrease the rate of reaction between magnesium and air.

What is rate of reaction?

Rate of reaction tells about the duration of the completion of the reaction.

Rate of any reaction is directly proportional to the concentration and surface area of the reactant, temperature, catalyst, no. of collision, activation energy, etc.

So, if we magnesium in the ribbon instead of powdered magnesium the surface area of the reactant side decreases which results in the decrease of the rate of reaction.

Hence, option (D) is correct i.e. rate of reaction decreases on using magnesium ribbon instead of powdered magnesium.

To know more about rate of reaction, visit the below link:

https://brainly.com/question/1898560

A 2.52 L container of oxygen gas at 28.6 °C is heated to 45.9 °C. Assuming that the volume of the container can vary, what is the new volume of the gas?

Answers

Answer:

4.04433566 L (433566 repeating)

Explanation:

2.52 is divided by 28.6 is 0.0881118 (881118 repeating). multiply 0.0881118 (881118 repeating) by 45.9 to get 4.04433566 L (433566 repeating).

Select the correct answer.
Which of the following might cause chemical contamination when used near food?
A.
furniture polish
B.
steel can
Ос.
glass container
OD. plastic bag
Reset
Next

Answers

Sounds like it would be Furniture Polish because it’s Polish and it tends to have strong chemicals.

please one more last help me on my task to go on baby corp​

Answers

Answer:?

Explanation: i'm confused with this and i know i should be writing this in comments but if you can explain me the question maybe i could help you

hydrocarbon structures methopane

Answers

what’s the question lol ??

What is electrons configuration for arsenic ?

Answers

Answer:

[Ar] 3d¹⁰ 4s² 4p³

Explanation:

so...... ur welcome

Zuzana tests a common household substance and finds that it has a pH of 3.

What type of substance is in the scenario?

acidic
basic
salt
neutral

Answers

a pH of 3 is acidic! hope this helps:)

a pH of 0-6 is acidic
a pH of 7 is neutral
a pH of 8-14 is basic

pH is a measurement of amount of hydronium ion H₃O⁺ in a given sample. More the value of hydronium ion concentration, more will be the solution acidic. The given substance is acidic. The correct option is option A.

What are acid and base?

Acid is a solution which releases H⁺ hydrogen ion when dissolved in water. Base are the solution which releases hydroxide ion OH⁻ ion when dissolved in water. The pH of acid is between 0-7 on pH scale while for base pH range is from 7-14.

On subtracting pH from 14, we get pOH which measures the concentration of hydroxide ion in a given solution. pH depend on the temperature. At room temperature pH scale is between 0 to 14. pH of neutral solution is 7.

Therefore, the given substance is acidic.  The correct option is option A.

To know more about acid and bases, here:

https://brainly.com/question/27228111

#SPJ2

A system gains 687 kJ of heat, resulting in a change in internal energy of the system equal to 156 kJ. How much work is done?
1. Work was done by the system.2. Work was done on the system.

Answers

Answer:

w = -531 kJ

1. Work was done by the system.

Explanation:

Step 1: Given data

Heat gained by the system (q): 687 kJ (By convention, when the system absorbs heat, q > 0).Change in the internal energy of the system (ΔU°): 156 kJ

Step 2: Calculate the work done (w)

We will use the following expression.

ΔU° = q + w

w = ΔU° - q

w = 156 kJ - 687 kJ

w = -531 kJ

By convention, when w < 0, work is done by the system on the surroundings.

100
80
100 mL
water vapor
Which statement describes what will happen if a student
pushes the plunger
to compress the water vapor?
A. The total number of water particles will increase.
B. The amount of energy in the water particles will decrease.
C. The amount of empty space between the water particles will
decrease.
O D. The total volume of the water particles will increase.


I will mark brainliest

Answers

Answer: c (the amount of empty space between the water particles will decrease)

Explanation: i got it right:)

Which state of matter has neutral particles that bounce off one another as they collide? A: Gas B: Liquid C: Plasma D: Solid ​

Answers

Answer:

Gas

Explanation:

it would be “a” gas because gas particles move so fast that they bounce off each other

1. a metal with 3 valence electrons, used in cans.
2. a period 3 element that will not react naturally.
3. has 5 valence electrons and in period 3.
4. the most reactive metal.

Answers

Answer:

.

Explanation:

1. aluminum

2. argon

3. phosphorus

4. francium

I cant really explain this one

A chemical reaction in a lab experiment actually produces 1.23mol of BeBr2. The theoretical yield is 220g. To two decimal places, what is the percentage yield

Answers

Answer:

Percent yield = 94.62%

Explanation:

Given data:

Actual yield of BeBr₂ = 1.23 mol

Theoretical yield of BeBr₂ = 220 g

Percent yield = ?

Solution:

Theoretical yield in moles:

Number of moles = mass/molar mass

Number of moles = 220 g/168.82 g/mol

Number of moles = 1.30 mol

Percent yield:

Percent tiled = actual yield / theoretical yield × 100

by putting values,

Percent yield = 1.23 mol / 1.30 mol × 100

Percent yield = 0.9462 × 100

Percent yield = 94.62%

Describe the process of dimensional analysis and explain why it is so useful in chemical problem solving.

Answers

Answer:

Dimensional Analysis (also called Factor-Label Method or the Unit Factor Method) is a problem-solving method that uses the fact that any number or expression can be multiplied by one without changing its value. It is a useful technique.

Which of the following has a tetrahedral molecular geometry?
NH3
CCl4
H2O
CO32-

Answers

Answer:

CCl₄

Explanation:

The molecule with a tetrahedral molecular geometry is CCl₄.

We know this according the valence shell electron pair repulsion theory.

To have a tetrahedral shape, a molecule must be made up of 4 bond pairs and no lone pairs.

This is clearly exhibited in the compound given;

 The central atom has 4 valence electrons which is completed bonded by 4 chlorine atom.

There is no lone pair but we have 4 bond pairs and a tetrahedral shape is formed.

if an atom has 15 protons and a mass of 31 how many neutrons will it have

Answers

Answer:

16 neutrons

Explanation:

now that protons are equal to electrons, there are 15 electrons. The mass is equal to 31.0, which is the ≡ of protons and ≡ neutrons added together. To find the number of neutrons, subtract the atomic # from the total mass #. 31-15=16 this would be equal to 16 now that the atomic has 31 and the mass is 15 subtract them ... you would get 16 neutrons inside the nucleus.

hope this helped ((((: if it did then please mark brainliest and have a wonderful day d:

Answer:

16

Explanation:

To find the neutrons, it's always mass-atomic number. Since the atomic number for an atom is always the protons, it's really mass-protons.

31-15=16

Match the definition with the correct term: 1/12th the mass of a carbon-12 atom.

Answers

Answer:

hydrogen atom but see the note below.

Explanation:

This is either the most common hydrogen ion or a hydrogen atom. It cannot be either of hydrogen's isotopes.

Is it balanced or unbalanced

Answers

No
It is all balanced except for the Oxygens in which case the product side is missing one oxygen (O) atom
(There is one less oxygen on the right side)

What do the rows in the Periodic Table tell us?

Answers

Answer:

The rows tell you how many shells there are of the atom.


How are the cells in our bodies organized? Cells are organized into ______ , _____
, and
_____ systems?
quick answer pls!

Answers

Answer:

Cell --> Tissues --> Organs ---> Organ System ---> Organism

How many atoms of each element are in the chemical formula NH4NO2?
1 nitrogen, 1 hydrogen, and 3 oxygen
O 1 nitrogen, 4 hydrogen, and 3 oxygen
2 nitrogen, 4 hydrogen, and 3 oxygen
O 5 nitrogen, 1 hydrogen, and 1 oxygen

Answers

5 nitrogen, 1 hydrogen, and 1 oxygen I think

3 elements that have similar properties

Answers

Answer:The elements in the first column of the Periodic Table (other than hydrogen) are known as Group 1A metals, or alkali metals. When you compare the chemical properties of these elements (lithium, sodium, potassium, rubidium, cesium, and francium), what you'll notice is that they are all remarkably similar.

Explanation:

Lithium, sodium, and potassium are the three elements from group number 1 of the periodic table that has similar chemical and physical properties, these group 1 metals are also known as alkali metals.

What is the atomic number?

The total number of protons present in an atom is known as the atomic number of that atom. The atomic number has no correlation either with the number of neutrons or the number of electrons present inside an atom.

Group 1 metals, often known as alkali metals, are a trio of elements from the periodic table that have similar chemical and physical characteristics. They are lithium, sodium, and potassium.

Thus, Lithium, sodium, and potassium are the three elements from group number 1 of the periodic table that has similar chemical and physical properties.

To learn more about the atomic number from here, refer to the links;

brainly.com/question/14190064

#SPJ2

The cost of table of sugar C12 H22 O11 is RS 24 per kg calculate it cost mole​

Answers

Answer:

One mole of sugar is a considered as atomic mass. The atomic mass of sugar is 342 g. Rate of 1 kg of sugar is 40 Rs. Thus, the rate of 342 gram of sugar= 40x342/1000 = 13.68 Rupees

Explanation:

A complex absorbs photons with an energy of 4.10×10^−19 J. What is the wavelength of these photons? If this is the only place in the visible spectrum where the complex absorbs light, what color would you expect the complex to be?

Answers

Answer:

483 nm corresponds to blue light hence the complex will appear orange.

Explanation:

Using the formula;

E= hc/λ

Where;

E = energy of the photon

h = Plank's constant (6.6*10^-34Js)

c = Speed of light (3*10^8 ms-1)

λ = wavelength

λ = hc/E

λ = 6.6*10^-34 * 3*10^8/4.10×10^−19

λ = 4.83 * 10^-7 or 483 nm

483 nm corresponds to blue light

Using the colour wheel approach, if a complex absorbs blue light, then it will appear orange.

11.
A sample of TNT, C-H5N306, has 7.30 1021 nitrogen atoms. Determine the numbers of
hydrogen atoms in this sample of TNT.
021​

Answers

Answer:

1.22 × 10^22 H atoms

Explanation:

From this question, TNT has the chemical formula: C-H5N306. The number of nitrogen atoms in the TNT substance is said to be 7.30 × 10^21 atoms.

The number of hydrogen atoms in the same TNT substance can be got using mole ratio. Based on the chemical formula, the mole ratio of hydrogen to nitrogen is 5:3 i.e. H5N3.

This means that;

Number of atoms of hydrogen = 5/3 of the number of atoms of nitrogen.

Hence, number of H atoms = 5/3 × 7.30 × 10^21

number of H atoms = (7.30 × 5/3) × 10^21

number of H atoms = (36.5/3) × 10^21

number of H atoms = 12.1666 × 10^21

number of H atoms = 1.2166 × 10^22 atoms.

Approximately, number of H atoms in TNT is 1.22 × 10^22 atoms.

how many moles is 8.72x10^24 atoms? can you solve the equation too?

Answers

Answer:

14.49 moles

Explanation:

To find the number of moles in a substance given it's number of entities we use the formula

[tex]n = \frac{N}{L} \\[/tex]

where n is the number of moles

N is the number of entities

L is the Avogadro's constant which is

6.02 × 10²³ entities

From the question we have

[tex]n = \frac{8.72 \times {10}^{24} }{6.02 \times {10}^{23} } \\ = 14.48504...[/tex]

We have the final answer as

14.49 moles

Hope this helps you

Example of market structures of monopoly

Answers

Answer: A monopoly is the absence of competition in the market.

Explanation:

In such circumstances, the market creates a monopoly of one producer who takes huge capital and dictates prices. An example of a monopoly on the market is the existence of only one company that makes up the entire economic branch. In such circumstances, the monopolist can increase the product's price without losing the entire sale, i.e., operating successfully. In that situation, the monopolist remains the only one on the market, and the competition has no access to the market.

The formula for calculating power is work divided by time (power = work + time). What are two ways of stating the same relationship?
work = power + time
nwork s power x time
power
time = work x power
Opower workx time
time
Work

Answers

Answer:

See the answer below

Explanation:

The formula for calculating power is such that;

  power = work/time

Two ways to restate the relationship between the 3 variables would be to make time and work the subject of the formula respectively.

1. When time if made the subject of the formula;

 time = work/time

2. When work is made the subject of the formula;

work = power x time

How much water would need to be added to 1092 mL of a 54.7 M NaCl solution to make a 0.25 M solution?

Answers

Answer:

237.8L of water would need to be added.

Explanation:

The first thing to do is to identify that the equation to be used is M1V1=M2V2. (This equation works because it turns everything into moles which can then be compared).

Then figure out what information you have and what is being found. In this case:

M1 = 54.7 M

V1 = 1092 mL = 1.092 L

M2 = 0.25 M

V2 = unknown

Then solve the equation for whatever you are trying to find.

M1V1=M2V2

V2=M1V1/M2

Now you need to plug everything in.

V2=(54.7M*1.091L)/0.25M

V2=238.93L

That means that the solution needs a volume of 238.7L to gain a molarity of 0.25M but the starting solution already had a volume of 1.092 L meaning that to find the amount of solvent that needs to be added you just subtract the starting volume by the volume that the solution needs to be.

238.93L - 1.091L = 237.8L

Therefore the answer is that 237.8L needs to be added to a 1.092L 54.7M NaCl solution to make the concentration 0.25M.

I hope this helps.  Let me know if anything is unclear.

Which energy source releases the most carbon dioxide?
O solar
O wind
O nuclear
O coal

Answers

Answer:

Coal

Explanation:

Coal is by far the worst emitter, followed by natural gas, with solar, wind and nuclear all low-carbon.

Coal, a non-renewable energy source releases the most carbon dioxide into the atmosphere.

What are energy sources?

Energy sources refers to the various sources in which energy for man's needs are obtained.

There are two types of energy sources:

Renewable energy sourcesNon-renewable energy sources

The non-renewable energy sources such as coal release large amounts of carbon dioxide until The atmosphere.

Therefore, Coal, a non-renewable energy source releases the most carbon dioxide into the atmosphere.

Learn more about non-renewable energy sources at: https://brainly.com/question/15415043

#SPJ2

is pure water a solution

Answers

Answer: No because a solution is a homogeneous MIXTURE of two or more substances. Water is a pure substance. It is made of hydrogen and oxygen, but shares none of their properties. So it’s pure.

Explanation:

Other Questions
If something was sold for $270 after it was reduced by 1/3 of the original price, what was the original price The television does not go out until after Diana Moon Clampers shoots and threatens people most likely because .Answer choices for the above questionA. those in charge know that the viewing public craves watching violenceB. it was most likely an accident that the signal aired the shootingC. the government wants the public to witness that the authorities are still in controlD. the authorities are trying to protect the families of the victims Please please help me on this Im having a lot of trouble doing this false dilemma definition What compound do organisms get from the air for cellular respiration?A.Carbon DioxideB.OxygenC.WaterD.ATP HELP ME! 1/2h=17+2 solve for h. whats the worlds biggest number ? NomDateClasseContractions with CHAPITRE2In English A contraction is a shortened form of a group of words: we will we'll.In English, contractions are usually negations or combinations of pronouns withhelping verbs. They always include an apostrophe in place of the missing letter orletters,don't isn't I'm he's they'veContractions are optional and rarely used in formal writing.You're coming to the party, aren't you?A Circle the contraction in each sentence. Then rewrite the contraction as a groupof individual words.1. This isn't my backpack.is not2. You don't like to dance?3. How come she's always late?4. How's it going, Bob?5. We've come a long way.6. Sam, you're a great friend.7. I haven't done my homework. 4. You have $40 in your wallet, but you do not want to spend all of it. You want to have at least some money left. You find a shirt for $5 and buy it. What is the amount of money (m) you have left to spend?OPTIONS (MULTIPLE CHOICES) ARE IN THE COMMENTS The process of photosynthesis converts carbon atoms from carbon dioxide into Factor the expression 4x + 32. Explain each step youtake in the process. You can use the interactive graph below to find the answer.\begin{cases} y=x+1 \\\\ y=2x-5 \end{cases} y=x+1y=2x5 Choose 1 answer:Choose 1 answer:(Choice A)AExactly one solution(Choice B)BNo solutions(Choice C)CInfinitely many solutions Which element could provide one atom to make an ionic bond with calcium How does CO2 level affect oxygen production? the verticals of a figure are given draw the figure and its image after a dilation with the given scale factor identify the type of dilatation A(-2,2) B(1,2) C(1,-1) 2. Write "PE" or KE" next to the types of energygravitationalsoundchemicalnuclearradiantthermalelasticelectrical For a relation where y is a function of x, y = 4 when x = 6. Which of the following does not represent another possible mapping in the relation?Choose the correct answer below.O A. x = 4 maps to y = 6OB. x = 3 maps to y = 2O C. X=0 maps to y = 0OD. X = 6 maps to y = 2O E. X = 1 maps to y = 6help asap please. i ned help on this one why was patrick henry not hopeful about the chance of peace? please help A psychologist wants to study about the intelligence levels of a group of children. Which is the best method for researching on psychological characteristics? Write a short note about this method.