The S.I unit of wavelength is metre. The wavelength is the separation between two crests or troughs that occur back-to-back.
What is the wavelength and frequency unit in the SI?The meter is the wavelength SI unit (m).Its number many oscillations per second is the definition of frequency. Hertz is the SI unit of frequency (Hz).What does wavelength mean?When electromagnetic radiation such as radio waves, light waves, or infrared (heat) waves travel through space, they leave behind distinctive patterns.Each waves has a distinct size and shape.Wavelength is the separation between peaks (high points).To know more about wavelength visit:
brainly.com/question/13533093
#SPJ4
What are the example of radiogenic?
Answer:
Radon and helium both of which form during the decay of heavier elements in bedrock.
For what value of lambda are the vectors perpendicular?
Consequently, if =3, vectors are perpendicular to one another.
Describe lambda.Greek letter lambda is part of the alphabet.
Lambda is mostly used as a variable in physics to indicate or denote the wavelength of any wave.
Lambda is the term used to describe the radioactive decay constant in nuclear physics and radioactivity.
Lambda is also used to refer to the linear charge density of a uniform line of electric charge in electric fields.
For further information on lambda
Visit
https://brainly.com/question/15728222
#SPJ4
What are 3 common uses for non-renewable energy?
Answer:- electricity, heating, transportation and manufacturing.
Explanation:First lets us know what non-renewable energy is.
Non-renewable energy is energy derived from finite resources that are not replaced quickly enough to keep up with the speed of consumption. For perspective, non-renewable energy sources will not be replenished in our lifetime, or, more accurately, many human lifetimes. Most non-renewable energy sources are fossil fuels such as petroleum and crude oil, coal, and natural gas¬, but nuclear fuel, mainly used to produce electricity, heating, transportation and manufacturing, is also generally classified as nonrenewable.
If you catch the ruler 8.3 cm from the lower end, what is your reaction time? Express your answer using two significant figures.
Answer:
Below
Explanation:
The time it take the ruler to fall .083 m is given by
d = 1/2 a t^2 d = .083 m a = 9.81 m/s^2
t = .13 s
Ms. Johns shows her class a correct model of the solar system. What can the model show that is just like the real solar system?.
The model will be just like the real solar system when it shows the moon and other satellites revolve around the earth.
Heliocentric model is the most accepted model of the solar system. Heliocentrism is the astronomical model in which the Earth and planets revolve around the Sun at the center of the universe.
The moon and the other satellites revolve around the earth due to the force of gravitation. The moon orbits the Earth once every 27.322 days. It also takes approximately 27 days for the moon to rotate once on its axis. As a result, the moon does not seem to be spinning but appears to observers from Earth to be keeping almost perfectly still. Scientists call this synchronous rotation.
learn more about solar system:
https://brainly.com/question/12075871
#SPJ4
A car is traveling on michigan street towards ward street. The car plans to turn right onto ward street. What is the angle measure of the turn?.
The angle measure of the turn is 105 degrees.
Acute Angle: An acute angle is one that is less than 90 degrees. Right Angle: A right angle is one that is exactly 90 degrees. Obtuse Angle An angle larger than 90 degrees is referred to as an obtuse angle.
An automobile moving in the direction of Ward Street on Michigan Street. Onto Ward Street, the automobile intends to turn right. the Ward Street angle is as follows: Michigan St Pennsylvania St The turn's angle is measured as
Since 75+x = 180 (a straight line)
Then x = 180-75=105
Know more about Angles at:
https://brainly.com/question/25716982
#SPJ4
consider the circuit shown in (figure 1). the initial current in the inductor is is(0+) = 0.
The questions is incomplete so I answered it in general way.
I= 1/L∫Vdt, where I is the current flowing through the inductor, L is the inductor's inductance, and V is the voltage across the inductor, is the formula that determines the inductor current depending on these input parameters. You will frequently come across the expanded formula I= I0 + 1/L∫Vdt.
A passive two-terminal electrical device known as an inductor, also known as a coil, choke, or reactor, stores energy in a magnetic field as electric current passes through it. Typically, an inductor is made out of insulated wire twisted into a coil.
According to Faraday's law of induction, when the current through the coil changes, the time-varying magnetic field induces an electromotive force (emf) (voltage) in the conductor. Lenz's law states that the induced voltage has an opposing polarity (direction) to the change in current that caused it. Inductors so reject any changes in the current flowing through them.
To know more about inductor
https://brainly.com/question/15893850
#SPJ4
What is the relationship between the mass of a student and the amount of work they do?
The relationship between the mass of a student and the amount of work they do is that the greater the mass, the more work.
What is Work?This is referred to as any type of activity which requires the use of physical or mental effort by an individual or thing.
In a scenario where an individual has a greater mass then there will be more work done and vice versa as a result of the formula of work being Force × distance where the Force = mass × acceleration which therefore explains the relationship between the mass of a student and the amount of work they do.
Read more about Work here https://brainly.com/question/25573309
#SPJ1
A group of scientists is studying the effect of a particular herbicide on the activity of plant cells. they want to observe the impact of the chemicals on the molecular structures inside the cell. which microscope would be the best tool for this research?
To observe the impact of the herbicide on the molecular structures inside plant cells, a microscope with high resolution and the ability to visualize small structures would be the best tool for this research. One option that could be suitable for this purpose is a transmission electron microscope (TEM).
A transmission electron microscope uses a beam of electrons to produce an image of the sample being studied. It has a higher resolution than a light microscope, and it is able to visualize structures as small as 0.2 nanometers in size. This makes it an ideal tool for studying the molecular structures inside cells, including proteins, DNA, and other cellular components.
Another option that could be used for this research is a scanning electron microscope (SEM). A scanning electron microscope uses a beam of electrons to produce a detailed, three-dimensional image of the surface of a sample. It has a lower resolution than a TEM, but it is able to visualize larger structures and features on the surface of cells.
Both TEMs and SEMs are powerful tools for studying the structures and functions of cells and molecular processes, and they are commonly used in scientific research and other applications.
To know more about microscope
https://brainly.com/question/18661784
#SPJ4
16. Two aircraft P and Q are flying at the same speed, 300 m s¯¹. The direction along which P is flying is at right angles to the direction along which Q is flying. a) Find the magnitude of the velocity of the aircraft P relative to aircraft Q. b) Find the direction of the velocity?
a) The magnitude of the velocity of the aircraft P relative to aircraft Q is 424 m/s
b) The direction of the velocity is 45 degrees.
What is the relative velocity?We know that the relative velocity has to do with the velocity of the object that is the same in magnitude and direction as the velocities of two or more objects together.
As such we have the velocities of the objects as;
P = 300 m s¯¹
Q = 300 m s¯¹
Since they are at right angles, the resultant is;
R = √(300)^2 + (300)^2
R = 424 m/s
b) The direction of the velocity is obtained as;
tan-1 = (300/300)
= 45 degrees
Learn more about relative velocity:https://brainly.com/question/19260269
#SPJ1
What causes thermal energy to transfer between two substances
When wood burns, a small amount of ashes is produced and gas is given off. How does this reaction demonstrate the law of conservation of mass?.
The law of conservation of mass states that matter can neither be created nor destroyed. When wood burns, the mass of the wood is converted into a small amount of ashes and gas. The total mass of the ashes and gas is equal to the mass of the wood before it was burned, demonstrating that the law of conservation of mass holds true.
answered
just now
What forces is used when sliding down a slide?
Gravity are being pulled down the slide by gravity, but there is also another physics principle at work: friction or resistance. Two factors contribute to friction's force.
What forces are at work when someone slides down a slide?Answer and justification Gravitational and frictional forces may have an impact on a child's motion as they descend a slide.
What forces are at work when an object slides?Contact is a force acting such as the normal force that prevents two things from sliding past one another. Friction moves an object's flat surface in a direction opposite to the normal force, which moves an object perpendicular to its flat surface.
To know more about Gravity visit :
https://brainly.com/question/14874038
#SPJ4
What does N solve mean?
The function NSolve("Equation", "Variable = starting value") generates a list of numerical solutions for the given equation for the specified unknown variable and its starting value.
What accomplishes N solve?Searches for solutions over the domain of real numbers in an effort to obtain numerical approximations to the solutions of the system of equations or inequalities for the variables vars.
Is there an infinite number of solutions?There are some equations that have infinitely many or no solutions. When simplified, equations without solutions won't have the same value. The same constant will be used on both sides to simplify equations having infinite solutions. An inconsistent system is a set of equations that cannot be solved.
To know more about system of equations visit:-
https://brainly.com/question/24065247
#SPJ4
Another piece of copper has a volume of 7 cm3 what is its mass?
The mass of a piece of copper that has volume of 7[tex]cm^{3}[/tex] is 62.58g.
A piece of copper has a volume of 7 [tex]cm^{3}[/tex], find what is its mass?The element copper (Cu) is a reddish, very ductile metal belonging to Periodic Group 11 that has an exceptional ability to conduct heat and electricity. In nature, copper can be found in its free metallic state.
Given,
Volume = 7 cm^3
we know that,
The density of copper is 8.960g/cm^3 in room temperature.
Density = mass / volume
Mass = Density x Volume
Mass = 8.960 x 7
Mass = 62.72 g
Mass of copper has a volume of 7 cm^3 is 62.72g.
To learn more about volume refer to
https://brainly.com/question/12410983
#SPJ1
How is cutoff value calculated?
The term "cutoff" in theoretical physics refers to an artificial maximum or minimum value of energy, momentum, or length that is used to exclude objects having values that are more or smaller than these physical quantities from calculations.
How often does a cutoff occur?A cutoff frequency, also known as a corner frequency or break frequency, is the frequency response threshold at which energy begins to be attenuated (reflected or diminished) rather than pass through a system.
The frequency above or below which the power output of a circuit, such as a line, amplifier, or electronic filter (such as a high pass filter), has decreased to a specific percentage of the power in the passband is known as the cutoff frequency or corner frequency in electronics.
The passband power, commonly known as the 3 dB point since a decline of 3 dB roughly equates to half power, is the proportion that occurs most frequently. The voltage ratio is falling in this case.
To learn more about cutoff values or cutoff frequency from given link
https://brainly.com/question/27986610
#SPJ4
How many companies have set Scope 3 targets?
From 936 firms in 2010 through 3,317 firms in 2021, more businesses reported Scope 3 pollutants in the available CDP dataset.
How many businesses have a science-based objective?A zero-carbon economy is being implemented around the world.The Research Based Goals initiative (SBTi) is working with more over 4,000 companies and financial institutions to cut their emissions in accordance with climate science.Learn more about their commitments and goals.
How are Scope 3 emissions targeted?Needed to make an informed transportation decisions, selecting which products or vendors to use, and pushing their suppliers to cut their own emissions are all ways that businesses can lower their Scope 3 emissions.
To know more about Scope 3 visit:
https://brainly.com/question/29546969
#SPJ4
Natural rubidium has the average mass 85. 4678 amu and is composed of isotopes rb-85 (mass = 84. 9117 amu) and rb-87. The ratio of atoms rb-85/rb-87 in natural rubidium is 2. 591. Calculate the mass of rb-87.
The correct response is 86.913 amu for Rb-87's mass.
Two isotopes of the rubidium (Rb) element exist: Rb-85, which has an atomic mass of 84.9117 amu, and Rb-87, which has an atomic mass of 86.9092 amu. Rubidium has an average atomic weight of 85.4678.
Both isotopes have a ratio of 2.591 to 1. Consequently, there is one Rb-87 atom for every 2.591 Rb-85 atoms.
Rb-85 abundance is 2.591/3.591 = 0.722% for 100% naturally occurring Rb, while Rb-87 abundance is 1 - 0.722 = 0.278.
84.9117 × 0.722 + X × 0.278 = 85.4678
X = 24.1618 / 0.278 X = 86.913 amu 61.306 + X 0.278 = 85.4678 X 0.278 = 85.4678 - 61.306 X 0.278 =86.913
To learn more about mass please click on below link
https://brainly.com/question/26789700
#SPJ4
What is force of friction short answer?
Frictional force that is produced when two surfaces attempt to move in one direction or in opposite directions is known as frictional force. the primary objective of frictional force.
Where is the force of resistance?Lever. A rigid piece of material is put over what is known as a fulcrum to form a lever. On one ends of the lever, which is also known as the resisting force, is an object that must be lifted. To lift the frictional resistance, effort is applied at the opposite end of the level.
What creates the force of resistance?Friction is resistance brought on by rubbing surfaces together, such as the stylus' tip and an object. Viscosity is a fluid's resistance to movement, such as water.
To know more about Frictional force visit :
https://brainly.com/question/13707283
#SPJ4
How do you find the frequency of a wavelength example?
Thus, from largest wavelength radio waves, microwaves, infrared, visible light, ultraviolet, x-rays, and ultimately gamma rays, which have the shortest wavelengths, are available.
How is the frequency example solved? The following are the many types of electromagnetic waves: radio waves, which have the longest wavelengths; microwaves; infrared; visible light; ultraviolet; x-rays; and ultimately, gamma rays, which have the shortest wavelengths.Subtract the duration of the event from the number of occurrences to determine frequency.Example:In Anna's calculation, the time is divided by the total number of webpage clicks (236). (one hour, or 60 minutes).Her average click rate is 3.9 per minute, she discovers.How many whole waves occur in a second is known as frequency.As a measure of frequency,Hertz (Hz = 1/second) is the unit of measurement for frequency.If a wave with a wavelength of 2 meters is moving at a speed of 6 meters per second, then 3 full waves pass by in a second.Consequently, the frequency is 3 waves per second (6/2), or 3.To learn more about frequency of wavelength refer
https://brainly.com/question/10728818
#SPJ4
what parameters do hubble's law relate to each other? galaxy rotation speed and luminosity galaxy classification and mass cepheid star period and luminosity galaxy recession velocity and distance galaxy mass and distance
The fundamental relationship between recessional velocity and distance is known as Hubble's law. The relationship between recessional velocity and redshift, excepting very small redshifts, depends on the cosmological model used.
What can we infer about the connection between distance and recessional velocity from Hubble's law?One observational consequence of the expansion is that galaxies appear to move away from you more quickly the further they are from you. As a result, the recessional velocity and distance are related. The Hubble's Law is the name of this phenomenon.
What main principle underlies Hubble's law?In big bang cosmology, the Hubble law postulates that galaxies move away from the Earth at a rate that is proportional to their distance.
To know more about Hubble's law visit:-
https://brainly.com/question/13705068
#SPJ4
What is the formula used to calculate energy using frequency?
E = hv is the energy equation. In the formula, E stands for energy, h for Planck's constant (6.626 x 10 -34 J s), and v for frequency. Since frequency rises as energy falls, frequency and energy are related directly in the energy equation. Because h is a constant, this is conceivable.
What is the energy and frequency relation?Each quantum's energy content is directly influenced by the radiation's frequency. Since the relationship between frequency and wavelength is inverse, the amount of energy carried is also inversely proportional to wavelength.
The link between the energy E and frequency v of a photon is expressed by the equation E=hv, where h is Planck's constant.
In essence, energy is directly proportional to radiation frequency but inversely proportional to wavelength. As a result, energy increases when frequency or wavelength decreases and decreases when frequency or wavelength increases.
To learn more about energy frequency relation from given link
brainly.com/question/13396102
#SPJ4
how to run and connect a wire from a receptacle in one room to a switch and receptacle in another room
To run a wire from a receptacle in one room to a switch and receptacle in another room, you will need to follow these steps:
Turn off the power to the circuit that you will be working on at the main electrical panel.Use a voltage tester to confirm that the power is off.Locate the receptacle in the first room and remove the cover plate.Identify the hot, neutral, and ground wires in the receptacle box. The hot wire is typically black or red, the neutral wire is white, and the ground wire is green or bare copper.Measure the distance from the receptacle to the switch and receptacle in the second room, and add a few feet to allow for any necessary bends or turns.Cut a length of wire that is long enough to reach from the receptacle to the switch and receptacle in the second room.Strip the insulation from the ends of the wire.Connect one end of the wire to the receptacle in the first room by attaching the hot wire to the brass terminal, the neutral wire to the silver terminal, and the ground wire to the green or bare copper terminal.Run the wire through the wall or ceiling to the switch and receptacle in the second room. You may need to use wire staples to secure the wire to the framing members.Locate the switch and receptacle in the second room and remove the cover plates.Identify the hot, neutral, and ground wires in the switch and receptacle boxes.Connect the other end of the wire to the switch and receptacle in the second room by attaching the hot wire to the brass terminal, the neutral wire to the silver terminal, and the ground wire to the green or bare copper terminal.Replace the cover plates on the switch and receptacle in the second room.Turn the power back on at the main electrical panel and test the switch and receptacle to confirm that they are working properly.That electrical work can be dangerous and should only be performed by a qualified electrician. If you are not comfortable or familiar with electrical work, it is recommended that you hire a professional to complete the job for you.
Learn more about electrical, here https://brainly.com/question/12791045
#SPJ4
in this experiment, what would be the effect if the point on the arm hanging the bob and the pointer are not on the same vertical line in the experiment?
If the point on the arm hanging the bob and the pointer are not on the same vertical line then the torque applied by the bob will not be zero.
When the point of arm and the pointer are in same vertical line than the angle between the point of arm and pointer will not be zero. We know that Torque is defined as the cross product of distance of point where force is applied and force applied on the body.
In other words, Torque=distance × Force
or Torque=rFsinθ(since cross product involves sinθ) where r is the distance and F is the applied force.
Since angle is not zero, therefore angle(θ) will be greater than zero,so sinθ have some value which is greater than zero,and it is enough to rotate the system from its equilibrium point.Due to torque,system will become unstable.
To know more about torque, visit here:
https://brainly.com/question/5352966
#SPJ4
(Complete question) is:
If a metal bob is rotated in a uniform circular motion in this experiement, what would be the effect if the point on the arm hanging the bob and the pointer are not on the same vertical line?
Can solar and wind work together?
Yes! As long as both receive enough sun or wind to create electricity, you can use both solar panels and wind turbines to charge your battery bank by running through a hybrid charge controller.
Can solar and wind energy be combined?Many renewable energy specialists believe that a tiny "hybrid" electric system that combines home wind and home solar (photovoltaic or PV) technology offers significant benefits over either one alone.
Which two issues do wind and solar energy have?Wind and sunlight are inherently unreliable and energy inefficient. As a result, installing a lot of solar and wind energy equipment on the grid raises the price of electricity production, locks in the price of fossil fuels, and has a negative impact on the environment.
To know more about solar energy visit :-
https://brainly.com/question/9704099
#SPJ4
How much of the ocean has been explored with sonar?
Currently, contemporary sonar technology has only been used to map fewer than 10% of the world's oceans. Only around 35% of the ocean and coastal waterways in the United States have been mapped using contemporary techniques.
Why don't we investigate the ocean's bottom?
It is challenging to attempt to travel to the ocean's depths. Between 4,000 and 6,000 metres below sea level is where the majority of the ocean bottom is located. The abyssal zone is what it is termed. The visibility is really poor because the sunlight doesn't penetrate very far down. Ocean trenches are a few smaller, deeper regions that exist beneath the ocean floor. Seamounts, volcanic islands, mid-oceanic ridges and rises, and seamounts are features that rise up from the ocean floor.
To know more about sonar, visit:
brainly.com/question/20510435
#SPJ4
Suppoe you are in a dark room. Can you ee object in the room? Can you ee object outide the room?
I may or may not see object in the dark room or outside the room because it all depends on the presence of light.
We realize that we can see an item when light reflected from its surface enter our eyes.There is no light in obscurity room .As there will be no light in obscurity room there will be no reflection. So we can not see any item in the room, In the event that there is light external the room, we will actually want to see object outside the room. This is on the grounds that the light reflected from object make picture in our eyes. So on the off chance that there is no light we will not ready to see, assuming there is light we will ready to see.
To know more about light, visit here:
https://brainly.com/question/2839762
#SPJ4
What is the value of 1 to the power n?
It's kind of in the definition of what 1 is to say that 1 to the power of anything is 1. You can use complicated powers, but the outcome will always be 1.
How do you calculate n's power?The simplest method for determining a number's nth power is to multiply it exactly n times. In this situation, we might simply calculate pow(2,-3) = 1/(23), which is the inverse of its positive power.
How is 1 n solved?Divide both sides by the left-hand integer to create a ratio with the notation 1: n. Divide both sides by the right-hand integer to represent the ratio as n: 1. to check if you're right.
To know more about nth power visit:-
https://brainly.com/question/29216288
#SPJ4
you fire a bullet from a gun that is 0.981 meters above ground aimed perfectly parallel to the ground. it has an initial velocity of 981 m/s. how long will it take the bullet to reach the ground?
The time taken for the bullet to reach the ground is 0.447 s
What is free fall?
Free fall is a concept of motion where an object is falling under the force of gravity and is only subjected to the force of gravity. It is experienced by objects that are not subject to any other type of force such as air resistance or drag. Examples of objects in free fall include an object dropped from a certain height, a skydiver in a belly-to-earth position, a spacecraft in orbit, or an object thrown upwards and then falling back down. A free fall can be thought of as a state of weightlessness, since the object is not subject to any other force, and is accelerating at a rate of 9.8 m/s2 (or 32 ft/s2). This acceleration is due to gravity and is known as the acceleration due to gravity.
Height from which the bullet id fired, h = 0.981 m
initial velocity of the bullet, u₁ = 981 m/s
Since it is fired parallel to the ground , the initial velocity u₁ does not have a vertical component
So it will be a free fall
Therefore the time taken to reach ground , t =√(2h/g)
t = √(2 * 0.981 / 9.81)
= √(1/5)
= √0.2
t = 0.447 s
Therefore the time taken for the bullet to reach the ground is 0.447 s
To learn more about free fall below is the given link:
https://brainly.com/question/12167131
#SPJ4
A mass spectrometer has a magnetic field of 5.00 mT. It is used to test an unknown particle which has a charge of 2e and is travelling at 100 m/s. If the resulting radius of curvature for the ion is measured to be 1.67 mm:
A. What is the particle's mass?
B. Which element is it? (You may require a periodic table.)
Answer:
A mass spectrometer uses a magnetic field to separate ions based on their mass-to-charge ratio. The mass of an ion can be calculated from its charge, velocity, and the radius of curvature of its path in the magnetic field, using the formula m = (qBv)/(2πr), where m is the mass, q is the charge, B is the magnetic field, v is the velocity, and r is the radius of curvature.
In this case, the magnetic field is 5.00 mT, the charge of the unknown particle is 2e, and its velocity is 100 m/s. The radius of curvature of the ion's path is measured to be 1.67 mm. Plugging these values into the formula above, we get:
m = (2e * 5.00 mT * 100 m/s) / (2π * 1.67 mm) = 0.24 g/mol
Therefore, the mass of the unknown particle is 0.24 g/mol.
To determine which element the particle is, we can use the periodic table to find an element with a mass-to-charge ratio of 0.24 g/mol. The element with the closest match is magnesium (Mg), which has a mass-to-charge ratio of 24.31 g/mol. Therefore, the unknown particle is likely to be a magnesium ion (Mg²⁺).