Answer:Douse the fire with baking soda: The chemical compound sodium bicarbonate, commonly called baking soda, is effective for extinguishing this type of fire. It takes a lot of baking soda to smother a grease fire, so pour it on while the flames are still small for the greatest effect
Explanation:
The grease fire has been put down by the addition of sodium bicarbonate as the extinguisher.
Grease fire has been defined as the fire that has been started with the over heating of the cooking oil at home. The fire has been started with the burning of the flammable liquids.
Extinguishing Grease fireThe fire in the cooking oil has been controlled with the addition of the sheet over the fire and turning off the flame.
The addition of water to grease fire results in the splashing of water over the fire and the spreading, resulting in the hazardous effects.
The sodium bicarbonate or baking soda has been used to put down grease fire.
Learn more about grease fire, here:
https://brainly.com/question/1142755
Which of the following is NOT an example of a chemical reaction?
a. sodium and chlorine forming salt
b. a candle burning forming carbon dioxide
c. a marshmallow releasing carbon when burned
d. ice turning into water
A) Sodium and chlorine forming salt, in this reaction salt is a new product with different properties than sodium or chlorine
Therefore it is a chemical reaction
B) A candle burning to form carbon dioxide, in this reaction carbon dioxide is a new product with different properties than the candles wax
Therefore it is a chemical reaction
C) Marshmallow releasing carbon is similar to the above one
Therefore it is a chemical reaction
D) Ice turning into water, in this reaction the water can be transformed into ice by freezing it
Therefore it is not a chemical reaction
The answer to your question is D) Ice turning into water
Happy to help :)
If you need anymore help, feel free to ask
Each element has its own set of characteristic absorption lines because Each element has its own set of characteristic absorption lines because the temperature of each element can varies. electron energy levels differ for each element. elements can exist in different forms of matter. absorption lines depend upon the speed of the object. each element has a different mass.
Answer:
Question is unclear
Explanation:
Answer:
what ru asking dear??? write question properly ??? Write the correct question from next time.
What is the mass in grams of 4.4 moles of the element tungesten, W?
Answer:
806.96 g
Explanation:
From the question,
Using,
No. of mole = reacting mass/molar mass.
n = R.m/m.m....................... Equation 1
make R.m the subject of the equation
R.m = molar mass of tungsten × number of mole of tungsten.................. Equation 2
Given: number of mole of tungsten = 4.4 moles
Constant: Molar mass of tungsten = 183.8 g/mol
Substitute these values into equation 2
Therefore,
mass of tungsten = 4.4×183.4
mass of tungsten = 806.96 g
809.6g is your answer
Answer:
1 mole of tungsten =184 g
4.4 mole of tungsten =184×4.4=809.6g
A sample of gas has a volume of 12.0 L and a pressure of 2.00 ATM. If the pressure of gas is increased to6.00 ATM, what is the new volume of the gas
Answer:
4L
Explanation:
During the chemical reaction given below 21.71 grams of each reagent were allowed to react. Determine how many grams of the excess reagent are left over after the reaction is complete. 2SO2()+O2()⟶2SO3()
Answer: 16.32 g of [tex]O_2[/tex] as excess reagent are left.
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
[tex]\text{Moles of} SO_2=\frac{21.71g}{64g/mol}=0.34mol[/tex]
[tex]\text{Moles of} O_2=\frac{21.71g}{32g/mol}=0.68mol[/tex]
[tex]2SO_2(g)+O_2(g)\rightarrow 2SO_3(g)[/tex]
According to stoichiometry :
2 moles of [tex]SO_2[/tex] require = 1 mole of [tex]O_2[/tex]
Thus 0.34 moles of [tex]SO_2[/tex] will require=[tex]\frac{1}{2}\times 0.34=0.17moles[/tex] of [tex]O_2[/tex]
Thus [tex]SO_2[/tex] is the limiting reagent as it limits the formation of product and [tex]O_2[/tex] is the excess reagent.
Moles of [tex]O_2[/tex] left = (0.68-0.17) mol = 0.51 mol
Mass of [tex]O_2=moles\times {\text {Molar mass}}=0.51moles\times 32g/mol=16.32g[/tex]
Thus 16.32 g of [tex]O_2[/tex] as excess reagent are left.
Drag the item to the corresponding match PLSS help me!!!
Answer:
I can't see picture sorry
Where did scientists find most of the nitrogen that the rats ate?
Answer:
They found the rats near or in a lake or river, due to high concentration of nitrogen in their body.
This is agree or disagree I need help ASAP!!
Answer:
disagree
sometimes they attract
Explanation:
Answer:
Explanation:
2. Agree
3. Agree
4. Agree
5. agree
6. disagree
If im wrong its because im tired lol
Neon occupies a volume of 6 L at 200 K. What volume will it occupy at 300 K
Answer: 9L
Explanation:
(6 x 300) = 1800 / 200 = 9
How many molecules are in 9.40 moles of AICI3?
I need help on this and the first person who answer correctly gets a BRANLIST..
I dont know if I pick the right answer so thats why I need help!!
Answer:
1 oxygen
Explanation:
cause H2O= two hydrogen + one oxyge
HELPPPPPPP PLEASEEEE
Answer:
Plant and Animal
Explanation:
The others are not accurate
What is the pH of a solution with an OH- ion concentration of 4.01E-4?
Answer:
[H]=10^-4 when ph=4 higher
[H]=10^-5 when ph =5 lower
Explanation:
brains
An open glass of water is placed on the table. After a while, the temperature and volume of the water are both altered. What kind of system does this describe?
Answer: Open system
Explanation:
I guessed and I got the right answer
what is the advantage of rusting
Answer:
Provide more strength
Explanation:
Rust is metal that has been oxidised . Oxides are usually more fragile and porous than their crystals metal equivalents. Some oxides, such as Aluminum oxide, are useful because they have a thin, strong shell that protects the metal from further corrosion.
What is the molar mass of Mn2Se7 ?
A.) 601.34 g/mol
B.) 542.50 g/mol
C.) 662.60 g/mol
Answer:
C. 662.60
Explanation:
the mass of Mn is about 54 grams/mol, (multiply that by 2 since there are 2 Mn's).
the mass of Se is about 79 grams/mol, so multiply that by 7
if you add them, you get 662.60 (approxamitly)
Answer:
C) 662.60
Explanation:
~~55*2 + 79*7 = 110 + 553 = 663 (~~662.60)
Which of the following describes a solution equilibrium? *
Solution equilibrium is the physical state in which the opposing processes of dissolution and crystallization of a solute occur at equal rates.
Can anyone help me out?
Use the drop-down menus to identify the experimental group with additional nutrients and the control group without additional nutrients. The experimental group consists of quadrats numbered? The control group consists of quadrats numbered?
The comparison of the results obtained from the experimental and the control groups validates the conclusions of the experiment.
What are experimental and control groups?The question is incomplete but I will, try to help you the much I can. The term experimental groups refer to the group that recieves the treatment while the control group is the group that did not receieve the treatment.
Hence, the comparison of the results obtained from the experimental and the control groups validates the conclusions of the experiment.
Learn more about experimental and control group:https://brainly.com/question/23389356?
#SPJ2
Answer:
The experimental group consists of quadrats numbered
✔ 1 to 16 or A
.
The control group consists of quadrats numbered
✔ 17 to 32 or B
.
Explanation:
A greenhouse is filled with air that cotains more carbon dixoide than normal air has. How might phothsyphness and plant growth be affeacted
Answer:
See explanation
Explanation:
We know that photosynthesis involves the combination of carbon dioxide and water in the presence of sunlight to yield glucose.
If the atmosphere is rich in carbon dioxide such as in a green house where air is filled with carbon dioxide, the rate of photosynthesis is increased.
As the rate of photosynthesis is increased, the growth of plants is also increased.
Hence, in a greenhouse where the air contains more carbon dioxide, the rate of plant growth increases.
80.0 grams of NaOH is dissolved in water to make a 6.00 L
solution. What is the molarity of the solution? (Molar mass of NaOH
= 40.0 g/mol)
M М.
Answer:
0.333 M
Explanation:
Divide the mass of NaOH by the molar mass and then divide by the volume.
80.0 g / 40.0 g/mol = 2.00 mol NaOH
2.00 mol NaOH / 6.00 L = 0.333 M NaOH
i. Write the dissolution reaction of BaF2, including all states. (0.5 points)
BaF2←>Ba2+(aq)+2F-(aq)
ii. Write the expression for Ksp for BaF2. (0.5 points)
iii. Write the Ksp expression as an algebraic equation, using the variable x to represent concentrations. (1 point)
iv. Find the solubility of BaF2 by solving the equation you wrote in part iii. (0.5 points)
Answer:
See Explanation
Explanation:
i) The equation of the dissolution of BF2 is;
BaF2(s)⇄Ba2+(aq)+2F-(aq)
ii) Ksp =[Ba2+] [2F-]^2
iii) Let the concentration/solubility of [Ba2+] and [2F-] be x
Ksp = [x] [2x]^2
Ksp = 4x^3
iv) x =∛Ksp/4
You add 28 grams of carbon. You find the actual yield to be 181.2 grams of CO2. What is the percent yield of CO2?
Answer:
79.14%
Explanation:
Given the equation : 2Fe2O3 + 3C 4Fe + 3C02
The theoretical yield of CO2 ; is 102.6g
Actual yield = 81.2 gram
Percentage yield = (actual yield / theoretical yield) * 100%
Percentage yield = (81.2 / 102.6) * 100%
Percentage yield = 0.7914230 * 100%
Percentage yield = 79.14%
Hence, tbe percentage yield of CO2 is 79.14%
What is the name for As4010?
Answer: As4010 is the Molecular Formula of Arsenic oxide. its Molecular Weight is 459.68.
hope its help you
have a great day keep smiling be happy stay safe.
What does oxygen hitch a ride on to move from the lungs to the blood and eventually the heart? Your answer
If a star is 300 light years away from Earth, how long does it take light from that star to reach Earth?
A. 300 days
B. 300 hours
C. 300 years
D. 300 light years
Answer: It would take 300 light years to reach Earth.
Explanation:
Which is the formula for a binary ionic compound composed of
iodine and sodium?
a Ina
b Either INa or Nal is acceptable.
С
lodine and sodium do not form a binary ionic
compound.
d Nal
Answer:
D. Nal
Explanation:
Took a K12 test and it was correct! :3 Hope this helps!
What volume of 7.68 M NaOH (aq) will neutralize 1.15 L of 2.35 M H2SO4 (aq) ?
A)1.38 L
B)0.704 L
C)0.276 L
D)1.90 L
E)1.75 L
A 2.50 L sample of butane gas (C4H10), measured at 22.0
oC and 1.20 atm pressure, is combusted completely and
the carbon dioxide gas collected at the same pressure and
temperature. What volume of CO2 is produced?
Answer:
Same i guess hdjekfhkshfjfkr
The resultant volume of the carbon dioxide gas which is produced by the combustion of butane is 14.4L.
How do we calculate the moles of gas?Moles of any gas will be calculated by using the ideal gas equation as:
PV = nRT, where according to qustion for butane gas
P = pressure = 1.20 atm
V = volume = 2.50L
n = moles = ?
R = universal gas constant = 0.082 L.atm / K.mol
T = temperature = 22 degree celsius = 295.15 K
On putting values we get
n = (1.20)(2.50) / (0.082)(295.15) = 0.124 moles
Given chemical equation is:
C₄H₁₀ + 13/2O₂ → 4CO₂ + 5H₂O
From the stoichiometry of the reaction, it is clear that,
1 mole of C₄H₁₀ = produces 4 moles of CO₂
0.124 mole of C₄H₁₀ = produces 4×0.124=0.496 moles of CO₂
Now we calculate the volume for the carbon dioxide gas at the given pressure and temperature as:
V = (0.496)(0.082)(295.15) / (1.20) = 14.4 L
Hence required volume of CO₂ is 14.4 L.
To know more about ideal gas equation, visit the below link:
https://brainly.com/question/24236411
#SPJ2
the internal energy of a substance Is called
Answer:
The internal energy is the total amount of kinetic energy and potential energy of all the particles in the system. ... When the substance melts or boils, energy is put in to breaking the bonds that are holding particles together, which increases the potential energy.
Explanation: