You should contact your references _____ a job interview.


only if the interviewer asks for your references

before and after

before

after

No, The FCC does not regulate online content. However, The FCC does place some restrictions and duties on broadcasters.

The Federal Communications Commission (FCC) is a separate branch of the U.S. government that regulates all domestic and international communications. In order to safeguard the interests of both consumers and businesses, the FCC maintains standards and uniformity across media platforms and communication channels.

Cellular and wireless access are distributed, mergers and acquisitions (M&A) of media companies are governed, intellectual property rights are safeguarded, and distribution and content standards are regulated for all media companies doing business in the United States.

The Federal Communications Commission, an independent body that reports to the American government, is mentioned above. The Communications Act, a piece of legislation that governs both domestic and international wire and radio communications, included it when it was first established in 1934.

Learn more about FCC

https://brainly.com/question/3621777

#SPJ4

Authorized holder of the information at the time of creation. is responsible for applying CUI markings and dissemination instruction

What is CUI?
A CUI (common user interface) is a user interface designed to provide a consistent way of interacting with a computer system, regardless of the underlying hardware or software technology. It is a graphical user interface (GUI) that provides a unified look and feel across all programs and devices, allowing users to easily access and use them. The CUI also simplifies the process of learning how to use a computer by providing a unified, intuitive way for users to interact with the system. The CUI can include windows, menus, buttons, icons, and other graphical elements that allow users to access and manipulate data.

To learn more about CUI
https://brainly.com/question/24847632
#SPJ1

The mass media monitors government actions as watchdogs and gives people, a platform for political expression.

To learn more about Mass media, refer:

https://brainly.com/question/26583326

#SPJ4

To change the header or footer, select Custom Header or Custom Footer. To add the header or footer information you desire in the Left, Center, or Right section, click the Left, Center, or Right section box, followed by any of the buttons.

Click Custom Header or Custom Footer in the Page Setup dialog box's Header/Footer tab. Select the Left section, Center section, or Right section boxes to determine where you want the page number to appear in the header or footer. In the chosen section, the placeholder &[Page] appears.

Therefore, Then select Header and Footer from the Insert menu. Depending on where you want the date or time to appear, click in the Left, Center, or Right areas of the Header or Footer.

Learn more about Header here:

https://brainly.com/question/29840345

#SPJ4

"Intranets are private corporate networks extended to authorized users outside the organization" is false.

Corporate networks vary from the group in that they retain formal relationships with one another through contracts (franchises, concessions, etc.) between both business units rather than through the use of financial linkages.

With an extended network, you are linked to another carrier's tower to receive service because your network does not contain any towers in that region.

Simply switch off Airplane Mode after a short period of time while keeping your smartphone in that mode.

"Intranets are private corporate networks extended to authorized users outside the organization" is false.

More about the corporate network extended link is given below.

https://brainly.com/question/14809186

#SPJ4

The system life cycle is used to guide network component conceptual design, use and support, phase-out, and disposal.

A conceptual model for project management known as the systems development life cycle (SDLC) details the phases of an information system development project, from the early phase of a feasibility study to the ongoing maintenance of the finished application.

Both technical and non-technical systems can use SDLC.

Network components are guided by the system life cycle in terms of conceptual design, use and support, phase-out, and disposal.

A system can be made up of only software, only hardware, or a combination of both, hence the systems development life cycle idea is applicable to a variety of hardware and software combinations.

Requirement analysis, design, development and testing, implementation, documentation, and assessment are the typical six phases of this cycle.

Therefore, the system life cycle is used to guide network component conceptual design, use and support, phase-out, and disposal.

Know more about the System life cycle here:

https://brainly.com/question/15696694

#SPJ4

Fossil fuels form in this type of environments: C. anaerobic.

In Science, a non-renewable resource can be defined as an energy source that generally takes a very long time to be created or an energy source whose creation happened a long time ago and isn't likely to happen again in the future.

Additionally, a non-renewable resource simply refers to an energy source that is both inexhaustible and irreplaceable such as the following:

In conclusion, fossil fuels typically forms during the anaerobic decomposition of buried dead organisms, which comprises organic molecules that are created through photosynthesis.

Learn more about non-renewable resource here: https://brainly.com/question/26237167

#SPJ1

With the ping -4 server1 command, you may find out how long it takes a packet to go around the world by sending 4 ICMP echo requests to server1, a distant site.

Data is divided into tiny units known as packets as it leaves your computer. In essence, these packets are tiny envelopes that transport data via the Internet.

The events that take place while one of these packets travels from one side of the Internet to the other will be explained in this article series. We'll examine every component and procedure a packet goes through as it traverses the Internet.

We'll look at some background data on each individual aspect of network communication first. After that, we'll examine each function's specific gadgets in more detail. Then, as we examine everything that occurs for communication to occur between two computers with various linked devices, we will tie everything together.

Learn more about Packet here:

https://brainly.com/question/17204743

#SPJ4

Answer:

use ssd

Explanation:

ssd is fast

if you have limited fund

then hard drive is good not for speed but for data capacity

it is an Arraysize-1 index that always starts at zero. If arrasize is 100, the range of the array's index or subscript is 0 to 99. Most languages, including C, C++, Java, C#, etc., adhere to this norm.

Using subscripts to provide table references is known as subscripting. A subscript is a positive integer whose value identifies the quantity of times a table element appears in the table.

Any qualifiers for the name of the table element are written after the subscripts, which are wrapped in parentheses. Such a reference must have an equivalent number of subscripts as there are dimensions in the table whose element is being referred. In other words, every OCCURS clause in the hierarchy that contains the data-name, including the data-name itself, must have a subscript.

When more than one subscript is necessary, they are expressed in the order of the data organization's increasingly less inclusive dimensions. Considering a multidimensional table as a collection of stacked

Learn more about Subscript here:

https://brainly.com/question/17327794

#SPJ4

By deducting the gain ratio of the splitting from the index of both the parent node, it is possible to determine the increase in the gain coefficient when dividing on a and b.

What is algorithm?

An algorithm is a set of instructions or steps that are designed to solve a problem or accomplish a task. It is an effective way of performing a task that can be repeated, with the same results each time. Algorithms are commonly used in computer programming and can range from simple to complex. They can be used to solve simple tasks such as sorting a list, to complex tasks such as playing a game of chess. Algorithms are also used in everyday life, such as when a person follows a recipe or drives to a destination. Algorithms help to make tasks easier and more efficient by breaking them down into smaller, manageable steps.
The information gain when splitting on a and b can be calculated by subtracting the entropy or gini index of the split from the entropy or gini index of the parent node. The attribute with the highest information gain would be chosen by the decision tree induction algorithm. The gain in the gini index when splitting on a and b can be calculated by subtracting the gini index of the split from the gini index of the parent node. The attribute with the highest gain in the gini index would be chosen by the decision tree induction algorithm. Yes, entropy and the gini index are both monotonously increasing on the range [0, 0.5] and monotonously decreasing on the range [0.5, 1].

To learn more about algorithm.
https://brainly.com/question/24953880
#SPJ4

The value chain's core functions include inbound logistics, operating outbound logistics, marketing and sales, and service.

To learn more about chain activities refer

https://brainly.com/question/24245161

#SPJ4

Answer:

source system

Explanation:

source system

Workstations, personal computers, and networking equipment all fall under the category of desktop computing devices.

To Learn more About desktop computing devices refer to:

https://brainly.com/question/24309282

#SPJ4

We call the algorithm "largesteven2" and the input is a list of n integers.

To learn more about fractional numbers refer to:

https://brainly.com/question/12088221

#SPJ4

If the compatibility with the cable type and wavelength in use is not carefully checked, transmitter mismatch layer 1 troubleshooting issues may develop.

If you are having trouble with your internet signal, you should restart your modem and router right away. Do not omit this phase! Since it frequently resolves the issue, this is nearly always what tech support will advise you to try first.

Check the cables frequently: An easy first step to take if you're experiencing issues with a particular piece of computer hardware, such your keyboard or monitor, is to make sure all linked cables are in good condition. They are suitably linked. Restart the computer: Restarting the computer is a solid option to attempt if all else fails.

To know more about layer troubleshooting visit:-

https://brainly.com/question/13041616

#SPJ4

Question:

Which Layer 1 troubleshooting issue can occur from not carefully ensuring compatibility with cable type and wavelength in use?

A) Transceiver mismatch

B) Crosstalk

C) dB loss

D) Opens and shorts

Using a method called MAC address filtering, a network administrator can limit access to a network based on the physical addresses of wireless NICs.

An administrator can restrict access to a network based on the physical addresses of wireless NICs using a technique known as MAC address filtering.

MAC filtering is typically located in the settings under Advanced Settings, Security, Access Control, or a section that is similar to these.

The precise location will depend on the router's brand.

There are two filtering options available for you to select from inside: Use a blacklist to block access to particular MAC addresses.

A MAC address filter gives the illusion of security but offers no true protection.

Therefore, it ought to be regarded as dangerous.

Use WPA2 to restrict access to certain devices if necessary.

Therefore, using a method called MAC address filtering, a network administrator can limit access to a network based on the physical addresses of wireless NICs.

Know more about MAC address filtering here:

https://brainly.com/question/14527362

#SPJ4

Answer:

False

Explanation:

An algorithm is NOT a guiding rule used to solve problems or make decisions.

Only desktop PCs have the highest level of performance. And you should expect to pay substantially more for the same performance if you want a laptop with specifications comparable to those of a desktop.

To Learn more About desktop PCs refer to:

https://brainly.com/question/24309282

#SPJ4

The policy that Rachel should set in individual user machines and servers is that Rachel should set the least functionality for both servers and user desktops.

Rachel should set the least functionality for both servers and user desktops in order to protect the network and its users. Setting the least functionality means setting the lowest level of access and permissions that are necessary for users to perform their tasks. This helps to prevent users from accidentally or intentionally accessing or modifying sensitive data or system settings.

Option a. Rachel should set the least functionality for the server to the users and administrative control on individual desktops is incorrect because it would give users too much control over the server.

Option b. Rachel should set administrative functionality for the server to the users and the least functionality on the individual desktops is incorrect because it would give users too much control over the server and the workstations.

Option d. Rachel should set no access for the server and setting administrative rights on desktops is incorrect because it would deny users access to the server, which would likely be necessary for them to perform their tasks. It would also give users too much control over the workstations.

Learn more about Intro to Cyber-security here: https://brainly.com/question/17579545

#SPJ4

A dimension table is a table in a data warehouse's star schema. A dimension table keeps the dimensions or qualities that define the items in a fact table. In data warehousing, a dimension is a group of references data about a quantifiable event.

A dimension table contains information on the various ways the fact table's data can be studied, while a fact table contains the data that will be evaluated.

Because it allows you to track historically important features, type 2 is the most popular sort of slowly changing dimension.

To know more about dimension table visit :-

https://brainly.com/question/13106855

#SPJ4

Some examples of removable media are USB flash drives, memory cards, and external hard drives. These types of media can be easily removed or inserted into a computer or other device, allowing users to transfer data or files from one device to another.

Answer:

India and China are indeed two of the countries with the largest number of internet users in the world. According to data from the International Telecommunication Union (ITU), as of 2021, India had about 560 million internet users, making it the second-largest market for internet users after China, which had about 904 million internet users.

The large number of internet users in these countries presents a significant opportunity for businesses, as it means that there is a large potential market for products and services that are offered online. Companies that are able to effectively reach and engage with these users can potentially see significant growth in their businesses.

However, it's important to note that just because a country has a large number of internet users doesn't automatically mean that it is a good market for a particular product or service. Companies need to carefully consider the specific needs and preferences of the target market in each country and adapt their offerings accordingly.

Explanation:

The phrase that will determine which fields are returned in the query is select name, city. The correct option is b.

A query might ask your database for data results, a specific action to be taken with the data, or both.

A query can add, alter, or remove data from a database, conduct computations, integrate data from other databases, and answer simple questions.

When organising vast amounts of complicated and varied data, non-relational databases are frequently used. Select name, city is the expression that will determine which fields are returned by the query.

Thus, the correct option is b.

For more details regarding query, visit:

https://brainly.com/question/29575174

#SPJ1

Answer:

blue

Explanation:

the code has DISPLAY which means show and then blue so, it will show blue

Blue. The code has DISPLAY which means show and then blue so, it will show blue.

A chic wheel spinner with many features and customizability. Simply enter your inputs, turn the wheel, and receive your random outcome.

Picker Wheel is a simple random picker that just requires three primary actions. Put inputs in, let the wheel spin, and get the outcome. It contains a lot of features that make making decisions enjoyable.

Your inputs are simply entered, and the spinning wheel produces a random response. The sophisticated algorithm that powers the wheel spinner will provide you with the most equitable result.

Therefore, Blue. The code has DISPLAY which means show and then blue so, it will show blue.

To learn more about Spinny wheel, refer to the link:

https://brainly.com/question/22433927

#SPJ2

Here is the solution to the MathTrick program:

public class MathTrick {

 // Step 1) Creates a random 3-digit number where the first and third digits differ by more than one

 // Hint: use modulus for the last digit and divide by 100 for the first digit.

 public static int getRandomNum() {

   int num = 0;

   int firstDigit = 0;

   int lastDigit = 0;

   // complete the method

   firstDigit = (int)(Math.random() * 9) + 1; // generates a random number from 1 to 9

   lastDigit = (firstDigit + (int)(Math.random() * 3) + 2) % 10; // generates a random number from 2 to 4 more than firstDigit, and takes the modulus to ensure it is a single digit

   num = Integer.parseInt(String.valueOf(firstDigit) + "0" + String.valueOf(lastDigit)); // concatenates the first and last digits to form a 3-digit number

   return num;

 }

 // Step 2 & 4) reverse the digits of a number

 public static int reverseDigits (int num) {

   // complete the method

   String numStr = String.valueOf(num); // convert num to a string

   numStr = new StringBuilder(numStr).reverse().toString(); // reverse the string using a StringBuilder

   return Integer.parseInt(numStr); // convert the reversed string back to an integer and return it

 }

 // Step 7) replace characters in a string according to the chart

 public static String replaceLtr(String str) {

   // complete the method

   str = str.replace('0', 'Y');

   str = str.replace('1', 'M');

   str = str.replace('2', 'P');

   str = str.replace('3', 'L');

   str = str.replace('4', 'R');

   str = str.replace('5', 'O');

   str = str.replace('6', 'F');

   str = str.replace('7', 'A');

   str = str.replace('8', 'I');

   str = str.replace('9', 'B');

   return str;

 }

 // Step 8) reverse the letters in a string

 public static String reverseString(String str) {

   // complete the method

   return new StringBuilder(str).reverse().toString(); // reverse the string using a StringBuilder

 }

 public static void main(String[] args) {

   // 1. Generate a random 3-digit number so that the first and third digits differ by more than one.

   int num1 = getRandomNum();

   // 2. Now reverse the digits to form a second number.

   int num2 = reverseDigits(num1);

   // 3. Subtract the smaller number from the larger one.

   int result = Math.max(num1, num2) - Math.min(num1, num2);

   // 4. Now reverse the digits in the answer you got in step 3 and add it to that number.

   result += reverseDigits(result);

   // 5. Multiply by one million.

   result *= 1000000;

   // 6. Subtract 733,361,573.

The MathTrick program is a program that generates a random 3-digit number where the first and third digits differ by more than one, then reverses the digits to form a second number. It then subtracts the smaller number from the larger one, reverses the digits in the answer and adds it to that number, multiplies the result by one million, and finally subtracts 733,361,573. It also includes methods to replace the digits in the final result with letters according to a given chart, and to reverse the letters in a string. The program is meant to demonstrate the use of various methods from the Math class and the String class in Java.

Learn more about code, here https://brainly.com/question/497311

#SPJ4

The effect that occurs when moving from one slide to another in a presentation is known as Slide transition. Thus, the correct option for this question is C.

Slide presentation may be defined as a series of presentations of photographic slides, or images on a transparent base, placed in a projector and viewed sequentially on a screen.

A slide transition is a visual effect that occurs when you move from one slide to the next during a presentation. You can control the speed, add sound, and customize the look of transition effects.

Therefore a slide transition is an effect that occurs when moving from one slide to another in a presentation. Thus, the correct option for this question is C.

To learn more about Slide transition, refer to the link:

https://brainly.com/question/1481663

#SPJ1

The programs that are permitted or prohibited on the system can be specified using AppLocker.

The most fundamental data security measure in Windows 7 is the NTFS permissions. Users who are logged in are prevented from accessing files and directories they do not have read or write permission to by NTFS permissions. When you have physical access to the computer, getting around NTFS permissions is quite simple.

The security procedure known as auditing logs particular operating system events in the Security log as they occur.

To know more about AppLocker visit :-

https://brainly.com/question/14898044

#SPJ4

False manual log analysis is favored since it is more likely to spot unusual activities.

A security principal or security group can be identified specifically using a security identifier. Security principals can represent any entity that the operating system is capable of authenticating, including user accounts, computer accounts, and processes that are active within the security context of these accounts.

A term that is preceded or followed by a single number, or a single word, should be avoided. Hackers will try to guess your password using word lists and passwords that are frequently used.

To know more about log analysis visit :-

https://brainly.com/question/29843087

#SPJ4

In programming, a method is a self-contained block of code that performs a specific task. It is typically defined as part of a class

public void removeJaneM(Map<String, String> phoneList) {

   if (phoneList.containsKey("Jane M")) {

       phoneList.remove("Jane M");

   }

}

To learn more about method refer :

https://brainly.com/question/9714558

#SPJ1